Sabrent EC-SSHD USB 3.0 to 2.5" SATA Hard Drive Adapter
- 4 In
- USB 3.0 to SSD/2.5…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Holds two M.2 NVMe SSDs up to 110 mm on a PCIe 5.0 x8 slot with tool-less trays and thermal pads
This adapter holds two M.2 NVMe drives in lengths 2230, 2242, 2260, 2280 and 22110. It connects through a PCIe 5.0 x8 slot and is backward compatible with PCIe 4.0 and 3.0. The removable tray uses a tool-less design for quick drive swaps. Builders adding high-speed storage to a workstation or server chassis will find it fits the need.
To see both drives the platform must split the link as x4, x4 on an 8-lane slot or x4, x4, x4, x4 on a 16-lane slot. Without that support only one drive will be visible. The step up from a single-drive riser is worth it when the CPU or chipset provides the necessary lane splitting and the workload needs two independent NVMe devices.
Slide the SSD into the tray, secure it with the integrated latch and insert the tray into the enclosure. The PCIe-powered design needs no extra cables. Common issues are motherboards that lack bifurcation in BIOS and thermal pads that shift during repeated swaps; check the manual before purchase.
Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LORDWORLD |
The adapter uses a PCIe 5.0 x8 interface and requires bifurcation set to x4, x4 on an 8-lane slot or x4, x4, x4, x4 on a 16-lane slot so each drive receives four lanes.
Slide the removable tray out, place the SSD onto the connector, press down until it clicks into the tool-less latch, then push the tray back into the enclosure until it locks.
The included thermal pad sits between each SSD and the metal tray; replace it when it dries out or after several drive swaps to maintain heat dissipation.
More in SATA, IDE & M.2 Drive Adapters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?