Sabrent EC-SSHD USB 3.0 to 2.5" SATA Hard Drive Adapter
- 4 In
- USB 3.0 to SSD/2.5…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds two USB-C 3.2 Gen 2 ports at 10 Gbps via a PCIe x4 slot with ASM3142 chipset and SATA power backup
This PCIe x4 expansion card adds two USB-C ports that operate at up to 10 Gbps using the ASMedia ASM3142 controller. It fits x4, x8 or x16 slots and ships with both full-height and low-profile brackets. A SATA 15-pin power connector is provided for devices that need extra current. The card does not work in a PCIe x1 slot.
The ASM3142 chipset maintains 10 Gbps signalling across both ports during long transfers rather than peaking only in short bursts. The onboard SATA power input feeds downstream devices directly, preventing voltage droop when multiple high-draw peripherals are connected. This architecture keeps bandwidth stable for external SSD arrays or docking stations under continuous load.
Builders moving from a single USB-C port or from 5 Gbps USB 3.1 Gen 1 gain a second 10 Gbps channel and dedicated auxiliary power. The step up is worthwhile when external storage, capture devices or multi-bay enclosures saturate a lone port. Systems without a free x4 or wider slot cannot use this card.
Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LORDWORLD |
The card has no published thermal or power figures; it relies on the PCIe slot and an optional SATA 15PIN connector for extra current.
The board includes a SATA 15PIN backup interface; connect it if your PCIe slot cannot supply enough current for two 10 Gbps devices.
The card requires a PCIe x4, x8 or x16 slot and explicitly does not support PCIe x1 slots.
More in SATA, IDE & M.2 Drive Adapters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?