LORDWORLD RJ45 Shield Plug Cat6 8P8C Crimp 24-28 AWG 6.0-7.0mm 15U Gold 2pcs

Shielded RJ45 Plugs for Industrial Cabling

These shielded RJ45 plugs accept Cat5, Cat6 and Cat7 patch cables with an outer diameter between 6.0 mm and 7.0 mm. They suit installers who need reliable terminations on round or flat stranded conductors ranging from 24 to 28 AWG. The nickel-plated shell provides 360 degree shielding for noise-sensitive environments. Each connector includes a load bar to simplify conductor placement during assembly.

Upgrade from Unshielded Connectors

The full 360 degree shield replaces basic unshielded plugs when electromagnetic interference degrades link stability in industrial or high-density runs. Phosphor bronze contacts with 15U gold plating improve corrosion resistance compared with thinner or non-gold finishes. The jump is worth it when cable routes run near power equipment, motor drives or dense cable trays where unshielded terminations suffer packet loss or re-negotiation.

Limits of the RJ45 Interface

The RJ45 form factor restricts maximum cable diameter to 7.0 mm, so thicker armoured or outdoor cables cannot be terminated with these plugs. Shield continuity depends on proper crimping technique and a compatible shielded cable; poor workmanship breaks the 360 degree path and negates the screening benefit. The 8P8C pinout also caps usable pairs at four, preventing use with emerging single-pair or higher-pair-count Ethernet standards.