We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided DisplayPort 1.4 extension cable male to female 3.3 ft

LUOM

LUOM DisplayPort 1.4 Extension Cable 3.3 ft Male to Female 32.4 Gbps 8K@60Hz Braided

SKU CH-41S4-5NKWH

A 3.3 ft male-to-female DisplayPort 1.4 extension cable rated for 32.4 Gbps bandwidth, supporting 8K at 60 Hz and high refresh rates up to 240 Hz with HDR and adaptive sync compatibility

  • Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz, 5K (5120 × 2880) @ 60 Hz /
  • Rated speedTest Value
  • Cable length3.3 ft (1.01 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 3.3 Feet

  • 8K@60Hz ultra-high resolution backed by 32.4 Gbps HBR3 bandwidth
  • 4K@144Hz and 2K@240Hz high-refresh gaming support with FreeSync and G-Sync
  • Triple-shielded solid copper conductor resists interference for stable signal transmission
  • 24K gold-plated connectors and braided jacket rated for 10000+ plug cycles
  • 3 ft male-to-female extension adds reach while protecting host ports from wear

What this cable does

This LUOM DisplayPort 1.4 extension cable adds 3.3 ft of reach between a graphics card and a monitor. It carries up to 32.4 Gbit/s bandwidth and supports 8K at 60 Hz, 4K at 144 Hz, and 2K at 240 Hz. The male-to-female design lets you extend an existing cable without replacing it. It is built for gamers and professionals who need a longer run at high refresh rates.

Signal quality over the full length

Triple-layer shielding and 26–30 AWG solid copper conductors keep the signal stable at the rated 32.4 Gbit/s across the whole 3.3 ft. The cable handles HBR3, DSC 1.2 compression and forward error correction to prevent dropouts during sustained high-resolution, high-refresh sessions. Gold-plated connectors and a nylon braid rated for over 10,000 insertions maintain contact integrity over time.

Check your ports and existing cable

Verify that both your source and display have full-size DisplayPort 1.4 connectors; this cable does not fit Mini DisplayPort or HDMI ports. Ensure the cable you are extending is also DisplayPort 1.4 compliant so the combined run supports the advertised resolutions and refresh rates. The extension adds one extra connection point, so confirm the total length still suits your desk layout.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 90% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLUOM
Model nameTJ-A028
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz,
5K (5120 × 2880) @ 60 Hz / 30 Hz,
4K (4096 × 2160) @ 144 Hz / 120 Hz/60 Hz/30 Hz,
2K (2560 × 1440) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
1080p (1920 × 1080) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort 1.4 Cable 8K@60 Hz
Connector genderMale to Female
Size & build
Overall length3.3 ft (1.01 m)
Cable length3.3 ft (1.01 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Will the braided extension cable add noticeable heat or power draw when I run my 4K@144Hz display all day?

The cable is passive with solid copper conductors and triple shielding, so it adds no active heat or power consumption; the 32.4 Gbps HBR3 rating simply carries the signal your GPU already produces.

What must my current DisplayPort cable and GPU port provide for this male-to-female extender to function?

You need an existing DisplayPort 1.4 (or 1.3/1.2/1.1) cable with a male connector and a GPU or monitor port that outputs DisplayPort 1.4 HBR3 signals up to 32.4 Gbps.

Does the extender maintain 8K@60Hz and DSC 1.2 when I keep my older DP 1.2 monitor in a multi-stream setup?

Yes, the cable is backwards compatible with DisplayPort 1.2 and 1.1, supports MST and DSC 1.2, and will transmit 8K@60Hz from a DP 1.4 source while the older monitor receives its native 4K@144Hz or 1440p@240Hz signal.

More in DisplayPort Monitor Cables

Similar items