We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey braided DisplayPort cable with male connectors at both ends, 16.4 ft long

LUOM

LUOM DP28 DisplayPort 1.4 cable 16.4 ft 32.4 Gbps HBR3 Grey

SKU CH-5TH3-PQF6C

A 16.4 ft DisplayPort 1.4 cable delivering 32.4 Gbps HBR3 bandwidth for 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with DSC 1.2 compression and HDR support

  • Refresh frequency8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 H
  • Rated speedSupports up to 32.4 Gbit/s bandwidth.
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Connector detailsDisplayPort to DisplayPort( Male to Male)

Cable Length 16.4 Feet

  • Enables 8K 60 Hz gaming with 32.4 Gbps HBR3 bandwidth
  • Delivers 4K 144 Hz and 2K 240 Hz for high-frame-rate play
  • Carries Dynamic HDR and 32 audio channels over 16.4 ft
  • VESA-certified construction with 28 AWG tinned copper conductors
  • Backward compatible with DisplayPort 1.3, 1.2 and 1.1 devices

16.4 ft DisplayPort 1.4 cable for high-refresh

This LUOM DP28 cable carries a DisplayPort 1.4 signal over 16.4 feet with a rated 32.4 Gbps bandwidth. It supports 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz, making it suitable for high-frame-rate monitors and HDR content. Male-to-male connectors fit standard DP ports on graphics cards and displays. The grey braided jacket protects the 28 AWG tinned copper conductors.

Sustained 32.4 Gbps throughput

The cable maintains the full HBR3 data rate across its length, allowing visually lossless 3:1 compression via DSC 1.2 and forward error correction to keep the link stable. HDCP 2.2 and 1.4 compliance protects premium 8K and 4K streams during extended sessions. Dynamic HDR and multi-screen transport remain active without signal drops. Backward compatibility covers DisplayPort 1.3, 1.2 and 1.1 hardware.

Simple plug-in install; verify port version for 8K

Connect each male end to a DisplayPort 1.4 socket on the GPU and monitor; no drivers or power are required. The 16.4 ft reach suits wall-mounted screens or cross-room routing. If the source or sink only offers DisplayPort 1.2, the link falls back to lower resolutions and refresh rates. Buyers needing longer runs or fibre-optic isolation cannot use this copper cable.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $18.99
Pricier than about 60% of the 3,804 comparable items (median $15.99).
Refresh frequency 8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLUOM
Model nameDP28
Product typeDisplayPort
Product colorGrey
Performance
Rated speedSupports up to 32.4 Gbit/s bandwidth.
Display
Refresh frequency8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort( Male to Male)
Connector genderMale to Male

Other versions of this model

5 more in the same range

Questions about this item

Does the 16.4 ft DP28 cable run hot or draw extra power during all-day 8K@60Hz use?

No — the cable is passive copper with no active electronics, so it adds no heat and draws no power beyond the signal itself.

What must my GPU and monitor already provide for the DP28 to deliver 4K@144Hz?

Both ends need a DisplayPort 1.4 port that supports HBR3 and DSC 1.2; the cable is male-to-male and requires nothing else.

Will the DP28 work with my older DisplayPort 1.2 monitor at 2K@165Hz?

Yes — the cable is backward compatible with DisplayPort 1.2 and will carry 2K@165Hz if the monitor and GPU support that mode.

More in DisplayPort Monitor Cables

Similar items