We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided DisplayPort 1.4 cable with gold male connectors, 16.4 ft long

LUOM

LUOM TJ-A033 DisplayPort 1.4 Cable 16.4ft 8K@60Hz HBR3 Braided

SKU CH-K17Q-AFVJY

A 16.4 ft DisplayPort 1.4 cable carries 8K at 60 Hz and 4K at 144 Hz over HBR3 bandwidth with triple shielding and gold-plated connectors

  • Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz, 5K (5120 × 2880) @ 60 Hz /
  • Rated speedTest Value
  • Cable length16.4 ft (5 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 16.4 Feet

  • 8K at 60 Hz for ultra-sharp visuals via HBR3 32.40 Gbit/s bandwidth
  • 4K at 144 Hz or 2K at 240 Hz for fluid competitive gaming
  • Triple-shielded solid copper conductors with 24K gold-plated connectors resist signal loss
  • Nylon-braided 16.4 ft length reaches distant monitors without clutter
  • Supports HDR, DSC 1.2, MST and 32 audio channels for immersive setups

Cable purpose and audience

The LUOM TJ-A033 is a 16.4 ft DisplayPort 1.4 cable built for gamers and professionals who need a long link between a graphics card or laptop and an 8K or high-refresh monitor. It carries HBR3 bandwidth up to 32.40 Gbit/s and supports 8K at 60 Hz, 4K at 144 Hz, and 2K at 240 Hz. Triple shielding and solid copper conductors keep the signal clean over the full length.

Sustained-load behaviour

HBR3 rating and DSC 1.2 compression maintain the full 32.4 Gbit/s throughput during extended gaming or rendering sessions without dropping frames. FEC forward error correction repairs bit errors on the fly, while HDCP 2.2 and 1.4 handshakes stay stable for protected 8K content. The braided jacket and gold-plated connectors resist heat build-up and connector fatigue over long periods of continuous use.

Pre-order checklist

Verify that both source and display have full-size DisplayPort 1.4 ports; the cable is male-to-male and will not fit Mini DisplayPort or USB-C alt-mode sockets without an adapter. Confirm that your GPU and monitor firmware support the target resolution and refresh rate combination listed in the specifications. Ensure the 16.4 ft run does not exceed the cable routing limits of your desk or wall installation.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $19.99
Pricier than about 62% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLUOM
Model nameTJ-A033
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz,
5K (5120 × 2880) @ 60 Hz / 30 Hz,
4K (4096 × 2160) @ 144 Hz / 120 Hz/60 Hz/30 Hz,
2K (2560 × 1440) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
1080p (1920 × 1080) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort 1.4 Cable 8K@60 Hz
Connector genderMale to Male
Size & build
Overall length16.4 ft (5 m)
Cable length16.4 ft (5 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Does the 16.4 ft braided DisplayPort 1.4 cable generate noticeable heat or signal loss when driving an 8K@60Hz monitor all day?

The cable uses solid copper conductors and triple shielding rated for HBR3 bandwidth up to 32.40 Gbit/s, so it maintains signal integrity at 8K@60Hz without excess heat buildup during continuous use.

What ports must my graphics card and monitor already have for this male-to-male DisplayPort 1.4 cable to work?

Both the source and the display need a standard DisplayPort 1.4 connector; the cable plugs directly into each without adapters.

Will this HBR3-rated cable run a 4K@144Hz monitor alongside an older 1080p@60Hz screen using multi-stream transport?

Yes, the cable supports MST and DSC 1.2, so it can drive a 4K@144Hz primary display and a 1080p@60Hz secondary display from a single DisplayPort 1.4 output.

More in DisplayPort Monitor Cables

Similar items