LUOM OZF1 HDMI Splitter 1x2 4K 30Hz Black

One-to-Two HDMI Splitter

The LUOM OZF1 takes a single HDMI source and sends identical video and audio to two displays at the same time. It is powered by an included 5V adapter to maintain signal strength over longer runs. The unit handles 3D formats and deep colour up to 36-bit depth. It suits setups such as a living-room TV plus a bedroom monitor, or a projector and a screen showing the same content.

4K 30Hz and 1080p 60Hz Capacity

Maximum resolution is 3840 x 2160 at 30Hz, while 1080p reaches 60Hz. The 6.75 Gbps bandwidth ceiling means higher refresh rates at 4K are not possible, so 4K 60Hz sources will be limited to 30Hz on both outputs. HDR metadata and HDCP 2.2 content are not supported, so protected 4K streams may fall back to 1080p or show no picture. The splitter only duplicates; it cannot extend a desktop across two screens.

HDMI 1.4b Interface Limits

The device complies with HDMI 1.4b and HDCP 1.3, so it cannot pass newer copy-protection or higher-bandwidth signals. Input cables should stay under 5 metres for 1080p, while each output can reach 10 metres at 1080p; the supplier quotes a total chain of up to 110 feet with shorter 4K cables. Buyers needing 4K 60Hz, HDR, HDCP 2.2, or independent extended displays will need a different solution.