We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 100 ft DisplayPort 1.4 male-to-male cable with directional Source and Display ends

LUOM

LUOM T0109 DisplayPort 1.4 Cable 100 ft 8K@60Hz 4K@144Hz

SKU CH-SW3N-V2QCV

A 100 ft optical DisplayPort 1.4 cable carrying 8K at 60 Hz and 4K at 144 Hz with directional source-to-display connectors

  • Rated speedTest
  • Cable length100 ft (30.5 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Connector genderMale to Male

Cable Length 100 Feet

  • Supports 8K at 60 Hz over 100 ft optical fibre
  • Delivers 4K at 144 Hz for high-refresh gaming
  • Double-shielded solid copper conductor resists interference
  • Directional Source/Display connectors ensure correct signal flow
  • Compatible with DisplayPort 1.2 and 1.4 devices

LUOM T0109 100 ft DisplayPort Cable

The LUOM T0109 is an optical fibre DisplayPort 1.4 cable measuring 100 ft. It carries 8K at 60 Hz and 4K at 144 Hz with HDR support. The male-to-male connectors use solid copper conductors and double shielding. Directional Source and Display ends must be matched to the source device and the monitor.

Suits long runs needing 8K 60 Hz.

Installers running a cable through walls or across a studio gain 30 m reach without signal loss. Gamers and VR users get 144 Hz refresh at 4K. The fixed Source-to-Display orientation means the cable will not work if the ends are swapped, so buyers who need a reversible passive copper cable should choose a different design.

Directional Source-to-Display connector orientation

The cable transmits in one direction only: the Source plug connects to the computer or laptop, and the Display plug connects to the monitor, TV or projector. Reversing the ends results in no picture. This single physical constraint decides whether the LUOM T0109 fits the installation.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $66.99
Pricier than about 89% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLUOM
Model nameT0109
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector genderMale to Male
Size & build
Overall length100 ft (30.5 m)
Cable length100 ft (30.5 m)
Cable shieldingDouble-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123

Other versions of this model

5 more in the same range

Questions about this item

What DisplayPort version must my graphics card and monitor both support for this cable to deliver 8K at 60 Hz?

Both the source and the display need DisplayPort 1.4 to achieve 8K at 60 Hz over this 100 ft cable.

Will this cable still pass a 4K 60 Hz signal if I keep an older DisplayPort 1.2 monitor on one end?

Yes, the cable is backward compatible with DisplayPort 1.2, so a 4K 60 Hz link will work, but 8K and 144 Hz modes require 1.4 on both sides.

How can I confirm the cable is operating correctly after I connect it?

Verify that the Source plug goes to the computer and the Display plug to the monitor, then check that the OS reports the expected resolution and refresh rate such as 8K at 60 Hz or 4K at 144 Hz.

More in DisplayPort Monitor Cables

Similar items