We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 33 ft optical DisplayPort cable with directional male connectors

LUOM

LUOM T0109 DisplayPort cable 33 ft 8K 60Hz 4K 144Hz

SKU CH-MPPA-T1PNP

A 33 ft fibre-optic DisplayPort 1.4 cable carrying 8K at 60 Hz and 4K at 144 Hz with directional source-to-display connectors

  • Rated speedTest
  • Cable length33 ft (10.1 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Connector genderMale to Male

Cable Length 33 Feet

  • 8K resolution at 60 Hz for ultra-clear visuals
  • 4K at 144 Hz delivers smooth high-refresh gaming
  • 33 ft optical fiber enables long-distance signal integrity
  • VESA certified DP 1.4 ensures broad device compatibility
  • Directional Source/Display connectors guarantee correct installation

LUOM T0109 33 ft DisplayPort 1.4 cable

The LUOM T0109 is a 33 ft fibre-optic DisplayPort 1.4 cable built for long-distance 8K 60 Hz and 4K 144 Hz links between a source device and a display. It suits installers who need a single male-to-male run across a room or through conduit without signal loss. The directional design means the Source and Display ends must be matched to the correct ports for the link to work.

Practical limits of DisplayPort 1.4 over 33 ft

The cable carries the 32.4 Gbit/s HBR3 bandwidth required for 8K 60 Hz and 4K 144 Hz, and the supplier rates the fibre construction for up to 100 m transmission. HDR and 3D formats pass through when both ends support them. Because the link is one-way, reversing the Source and Display connectors will result in no picture, so orientation must be observed during installation.

Check your setup before ordering

Verify that your graphics card or laptop has a DisplayPort 1.4 output and that your monitor or projector accepts the target resolution and refresh rate over DisplayPort 1.4. Confirm the 33 ft length fits the planned route and that you can identify the marked Source and Display ends before pulling the cable. The connection is plug-and-play once the direction is correct.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $43.99
Pricier than about 78% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLUOM
Model nameT0109
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector genderMale to Male
Size & build
Overall length32 ft (9.75 m)
Cable length33 ft (10.1 m)
Cable shieldingDouble-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 32 ft or 33 ft length for my setup?

The cable is listed as both 32 ft and 33 ft; they refer to the same 10 m optical fibre run, so pick the length that matches your measured source-to-display distance.

What does the 8K 60 Hz rating mean when I connect this cable to my PC and monitor?

It supports 8K at 60 Hz and 4K at 144 Hz provided both your graphics card and display natively support those modes; the cable itself carries the required 32.4 Gbps bandwidth.

Which DisplayPort version does this cable use and what bandwidth does that cap?

It uses DisplayPort 1.4 with HBR3 signalling, capping the link at 32.4 Gbps for 8K 60 Hz or 4K 144 Hz transmission.

More in DisplayPort Monitor Cables

Similar items