We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided DisplayPort 1.4 cable with gold male connectors, 10 ft

LUOM

LUOM TJ-A033 DisplayPort 1.4 cable 10 ft 32.4 Gbps HBR3

SKU CH-1EY6-9G1XN

A 10 ft DisplayPort 1.4 cable rated for HBR3 bandwidth of 32.4 Gbps, supporting 8K at 60 Hz and 4K at 144 Hz

  • Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz, 5K (5120 × 2880) @ 60 Hz /
  • Rated speedTest Value
  • Cable length10 ft (3.05 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 10 Feet

  • 8K 60 Hz clarity backed by 32.4 Gbps HBR3 bandwidth
  • 4K 144 Hz gaming fluidity via DisplayPort 1.4 link
  • 2K 240 Hz competitive edge on 10 ft braided cable
  • HDR and HDCP 2.2 content protection over solid copper conductors
  • Multi-stream transport and DSC 1.2 enable multi-monitor 8K workflows

10 ft DisplayPort 1.4 cable for 8K

This 10 ft LUOM cable carries DisplayPort 1.4 signals at HBR3 bandwidth up to 32.4 Gbps. It connects a GPU or laptop to a monitor, projector or TV with male-to-male connectors. The link supports 8K at 60 Hz, 4K at 144 Hz and 1080p at 240 Hz for gaming, creative work or multi-display setups. Triple shielding and solid copper conductors preserve signal integrity over the full length.

Passive cable with no active electronics or power

The cord is entirely passive so it adds no heat, fan noise or extra load to the system power budget. Gold-plated contacts and a nylon-braided jacket resist oxidation and physical wear without requiring firmware or driver support. Forward Error Correction and DSC 1.2 help maintain error-free frames at the highest resolutions. HDCP 2.2 and 1.4 compliance allows protected content playback.

Fits any build with two full-size DisplayPort 1.4

The 10 ft reach lets you route the cable behind desks, through cable channels or across a room without signal boosters. Male-to-male ends plug directly into source and display, freeing up USB-C or HDMI ports for other peripherals. MST support enables daisy-chaining compatible monitors from a single output. Buyers who need DisplayPort 2.0 bandwidth, USB-C alt-mode or lengths beyond 10 ft should choose a different cable.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $16.99
Typical for this category: the median of 3,804 items is $15.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLUOM
Model nameTJ-A033
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz,
5K (5120 × 2880) @ 60 Hz / 30 Hz,
4K (4096 × 2160) @ 144 Hz / 120 Hz/60 Hz/30 Hz,
2K (2560 × 1440) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
1080p (1920 × 1080) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort 1.4 Cable 8K@60 Hz
Connector genderMale to Male
Size & build
Overall length10 ft (3.05 m)
Cable length10 ft (3.05 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

How do I install the LUOM TJ-A033 DisplayPort 1.4 cable, and what step do people often get wrong?

Connect each male DisplayPort 1.4 connector firmly until the locking latches click; the common mistake is leaving one end unlatched, which causes intermittent 8K@60Hz or 4K@144Hz signal loss.

What maintenance or replacement will the LUOM TJ-A033 cable need later?

The triple-shielded, nylon-braided cord with solid copper conductors and 24K gold-plated contacts requires no scheduled maintenance; replace only if physical damage breaks the latch or cuts the jacket.

What limit appears first under sustained high-bandwidth use on this cable?

The 32.4 Gbps HBR3 bandwidth ceiling is the first hard limit; driving 8K@60Hz or 4K@144Hz continuously stays within spec, but any future source demanding more than 32.4 Gbps will exceed the cable rating.

More in DisplayPort Monitor Cables

Similar items