We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver cylindrical end mill with two flutes and a rounded ball nose tip

M.A. Ford

M.A. Ford 15615752A Tuffcut DM 2 Flute Ball Nose End Mill 4.0 mm

SKU CH-FE7J-KSPBR

A 4.0 mm two-flute ball-nose end mill with a necked shank for contoured milling cuts

  • Product typeCutting Tools
  • Precision milling with 2-flute ball nose design
  • 0 mm cutting diameter for detailed work
  • Necked shank improves reach in deep cavities
  • TuffCut DM coating extends tool life
  • New condition ensures full factory performance

Industrial cutting tool

The M.A. Ford 15615752A Tuffcut DM is a 2 flute ball nose end mill with a 4.0 mm cutting diameter. It is intended for machinists and fabricators who need a necked profile for contouring and profiling operations in a variety of materials. This new cutting tool arrives ready for use in CNC milling applications.

California Proposition 65 notice

This product carries a California Proposition 65 warning for exposure to a chemical known to cause cancer. A second Proposition 65 warning applies for a chemical known to cause birth defects or other reproductive harm. Buyers should review safety data sheets and follow handling guidelines before use.

4.0 mm cutting diameter

The 4.0 mm diameter is the primary specification that determines compatibility with your toolholder and the required feature size in the workpiece. Select this end mill only when the design calls for this exact cutting width. Buyers who need a different diameter must choose another tool.

How it compares

Measured against everything we stock in Yard Ornaments & Garden Statues, at today’s prices. Recalculated every night.

Price $66.99
Pricier than about 71% of the 1,271 comparable items (median $40.99).

Specifications

Product
Brand nameM.A. FORD
Product typeCutting Tools

Questions about this item

How do I install the 4.0 mm ball nose end mill in my CNC machine and what step is often missed?

Secure the 4.0 mm shank in a precision collet or hydraulic holder, then verify run-out with a dial indicator before cutting; skipping the run-out check is the step most operators miss.

What maintenance will the 2 flute Tuffcut DM end mill need during its service life?

Inspect the ball nose and necked section for wear after each job, re-sharpen the two flutes when edge radius increases, and replace the tool once the coating is worn through.

What limit appears first when running the 15615752A continuously in steel?

Heat buildup at the 4.0 mm cutting diameter degrades the coating fastest, so tool life ends when the surface treatment fails rather than when the carbide substrate fractures.

More in Yard Ornaments & Garden Statues

Similar items