STARTECH HDMI-SPLITTER-4K60UP 2-Port 4K 60Hz Video Splitter
- HDMI Splitters
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Routes four HDMI sources to four displays with seamless 4K60 4:4:4 switching and video-wall layouts
The Monoprice Blackbird 144556 is a professional 4x4 matrix switcher built for HDMI 2.0b signals. It routes any of four sources to any of four displays with full 4K60 4:4:4 support. HDCP 2.2 and 1.4 compliance protects premium content across corporate, education and entertainment installations.
This unit suits AV integrators who require instant, glitch-free transitions between sources and the ability to build 2x2, 4x1 or 1x4 video walls. It is not for users who only need simple signal splitting without matrix routing. Buyers requiring more than four inputs or four outputs must look at larger chassis solutions.
The single specification that decides fit is the HDMI 2.0b bandwidth carrying 4K at 60 Hz with 4:4:4 chroma sampling. If the installation demands higher refresh rates or greater colour depth than this standard provides, this matrix will not meet the requirement.
Measured against everything we stock in HDMI & Video Splitters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 144556 |
| Part number | 144556 |
The HDMI 2.0b ports handle 4K resolution at 60 Hz with 4:4:4 chroma sampling, which is the maximum throughput this standard allows.
It is a standard 1U rack-mount chassis weighing 11.02 kg, so allow one rack unit of height and enough rear depth for four HDMI inputs, four HDMI outputs, plus RS-232 and Ethernet cables.
Connect the unit to the network, then use the web browser interface to assign IP settings and map inputs to outputs; the step most often missed is saving the EDID configuration for each output before deploying the video wall layout.
More in HDMI & Video Splitters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?