We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules with black chips, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 1.1TB 12x96GB DDR5 5600 CL46 ECC RDIMM GIGABYTE MZ33-AR1 memory upgrade

SKU CH-V6WN-6TN7Q

A 1.1 TB DDR5 ECC registered DIMM kit with twelve 96 GB modules running at 5600 MT/s CL46, validated for the Gigabyte MZ33-AR1 motherboard

  • Total capacity1.1 TB (12 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 1.1TB 12X96GB

Show 24 more
  • 1TB total capacity across 12 modules of 96GB each
  • DDR5 5600 speed with CL46 latency at 1.10V for rated performance
  • Registered ECC architecture with 2Rx4 rank for full-slot stability and error correction
  • 288-pin RDIMM form factor matched to GIGABYTE MZ33-AR1 motherboard requirements
  • Major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Capacity and fit

This kit delivers 1.1 TB of DDR5 memory across twelve 96 GB RDIMMs built for the GIGABYTE MZ33-AR1 motherboard. Registered ECC design meets the demands of virtualization hosts, database servers and high-thread-count compute nodes.

Registered ECC advantage

It replaces unbuffered UDIMM or non-ECC modules that cannot populate every slot at full speed on this platform. The 2Rx4 registered architecture lets the memory controller drive all twelve slots at 5600 MT/s while ECC corrects single-bit errors before they cause data corruption or reboots.

Installation checks

Modules use the standard 288-pin DDR5 RDIMM form factor and operate at 1.10 V, but the board enforces a strict population order that varies by CPU configuration. Consult the motherboard manual for the approved slot sequence and maximum supported capacity per processor before seating the DIMMs.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $31,448.99
Pricier than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 1.1 TB (12 × 96 GB)
Higher than about 94% of the 20,941 comparable items (median 32 GB).
Price per GB $28.59 per GB
Pricier than about 81% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K12
Total capacity1.1 TB (12 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items1.1 TB 12 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 288-pin RDIMM modules fit the DIMM slots on my GIGABYTE MZ33-AR1 motherboard?

Yes, the kit uses 288-pin DDR5 RDIMM form factor, which is the exact slot type required by the GIGABYTE MZ33-AR1 motherboard.

What is the correct population order for installing all 12 modules on the GIGABYTE MZ33-AR1?

Install modules following the motherboard manual's approved DIMM population sequence; the kit is spec-matched to the board's memory-population rules for full 1.1TB capacity.

Do these RDIMMs require any firmware updates or ongoing maintenance after installation?

No firmware updates are needed for the memory itself; ensure the motherboard BIOS is current for DDR5 5600 support, and the ECC registered design handles error correction automatically.

More in Model-Specific Memory Upgrades

Similar items