We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 1TB (8 x 128GB) DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H14SHM

SKU CH-JWWQ-WGZZ8

A 1 TB kit of eight 128 GB DDR5 5600 registered ECC RDIMMs built to the Supermicro H14SHM motherboard's exact rank, voltage and timing requirements

  • Total capacity1 TB (8 × 128 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 1TB capacity across eight 128GB modules for dense server memory
  • DDR5-5600 speed with CL46 latency matches platform timing requirements
  • Registered ECC design corrects single-bit errors to prevent data corruption
  • 2Rx4 rank and 1.10V voltage align with Supermicro H14SHM memory controller specs
  • 288-pin RDIMM form factor fits the motherboard's registered DIMM slots

1 TB DDR5 ECC RDIMM kit for Supermicro H14SHM

This 1 TB kit contains eight 128 GB DDR5 5600 registered ECC DIMMs built to the exact rank, voltage and timing the Supermicro H14SHM memory controller expects. It is intended for administrators who need to fully populate the board with validated server memory.

Registered architecture

The registered design buffers every command so all eight slots run at the rated 5600 MT/s without signal degradation during sustained workloads. On-die ECC corrects single-bit errors in real time, preventing silent data corruption that would otherwise force unplanned reboots in production environments.

Verify DIMM population rules before ordering

Consult the Supermicro H14SHM manual for the approved population sequence, maximum capacity per channel and any BIOS version requirements. The board requires 288-pin RDIMMs; UDIMMs or SODIMMs will not fit and cannot be used as alternatives.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $31,429.99
Pricier than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 1 TB (8 × 128 GB)
Higher than about 93% of the 20,941 comparable items (median 32 GB).
Price per GB $31.43 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-724K8
Total capacity1 TB (8 × 128 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1 TB 8 × 128 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

At 1.1 V and DDR5 5600 speed, how much heat do eight 128 GB RDIMMs generate when the server runs 24/7?

Each module operates at the standard 1.1 V DDR5 voltage, so total power draw scales with eight 128 GB sticks. Registered buffering and ECC add minimal overhead; expect typical DDR5 RDIMM thermals under sustained load.

What motherboard and CPU combination must I already own for this 1 TB kit to function?

You need a Supermicro H14SHM motherboard with a CPU that supports DDR5 5600 registered ECC memory. The 288-pin RDIMM form factor and 2Rx4 organization must match the board's qualified vendor list.

Can I mix this 2Rx4 CL46 DDR5 5600 kit with other DDR5 RDIMMs of different rank or latency on the same H14SHM board?

Mixing ranks or timings is not recommended. The board's memory controller expects identical 2Rx4 CL46 modules across all populated slots to run at the rated 5600 MT/s without down-clocking or stability issues.

More in Model-Specific Memory Upgrades

Similar items