We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 1.5TB DDR5-5600 ECC RDIMM 16x96GB CL46 1.1V 2Rx4 Supermicro H13DSG-OM

SKU CH-6RCM-BTYJ8

A 1.5 TB DDR5-5600 ECC registered RDIMM kit of sixteen 96 GB modules at CL46 and 1.1 V, validated for the Supermicro H13DSG-OM motherboard

  • Total capacity1.5 TB (16 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 5 TB capacity from sixteen 96 GB modules for dense server workloads
  • DDR5-5600 speed with CL46 latency runs at rated frequency on the H13DSG-OM
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V operation matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-OM without adapters

Exact-Match Server Upgrade

This 1.5TB kit contains sixteen 96GB DDR5-5600 RDIMMs built to the precise rank, voltage and timing the Supermicro H13DSG-OM expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. It targets administrators who need maximum capacity on this specific platform.

Installation Notes

The 288-pin registered form factor fits only RDIMM slots — not UDIMM or SODIMM sockets. Population order and maximum supported capacity vary by motherboard revision, so the system manual must be consulted before installation. No heat spreaders are included, so airflow across the modules should be verified in dense chassis.

Capacity and Headroom

Sixteen dual-rank modules deliver 1.5TB total at 1.1V with CL46 latency, suited for large in-memory databases and virtualization hosts. The kit reaches the board’s slot limit, so further expansion requires a different platform. Workloads exceeding this capacity or needing higher frequencies will need a motherboard with more channels or faster memory support.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $43,495.99
Pricier than about 95% of the 21,161 comparable items (median $397.99).
Total capacity 1.5 TB (16 × 96 GB)
Higher than about 97% of the 20,941 comparable items (median 32 GB).
Price per GB $29.00 per GB
Pricier than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K16
Total capacity1.5 TB (16 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.5 TB 16 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I verify the kit runs at DDR5-5600 with CL46 after installation?

Enter the server BIOS or UEFI and confirm the memory frequency shows 5600 MT/s and the CAS latency reads 46; the registered ECC design ensures all sixteen 96 GB modules operate at the rated 1.1 V without manual tuning.

What comes in the package and is anything else required?

The box contains the complete 1.5 TB kit — sixteen 96 GB DDR5 288-pin RDIMMs — and no additional parts or cables are needed for installation in the Supermicro H13DSG-OM motherboard.

Why choose the 16 × 96 GB configuration instead of a smaller kit?

This 16-module kit delivers the full 1.5 TB capacity the H13DSG-OM supports when every DIMM slot is populated with 2Rx4 registered ECC modules at 5600 MHz, maximizing throughput for memory-intensive workloads.

More in Model-Specific Memory Upgrades

Similar items