NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 262-PIN SODIMM Supermicro X14SAV-TLN4F memory upgrade
- 16 GB
- 262-Pin DDR5 SODIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 16 GB DDR5 SODIMM kit running at 5600 MT/s with CL46 latency, verified for the Supermicro X14SPN-H motherboard
Size 16GB 2X8GB
This 16 GB kit delivers two 8 GB DDR5 SODIMM modules rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for the Supermicro X14SPN-H motherboard and uses the 262-pin unbuffered form factor that the platform requires.
Low 1.1 V voltage keeps power draw modest and heat output minimal in normal workloads. No heat spreader is fitted, so airflow across the modules handles cooling silently.
The kit replaces lower-capacity or slower DDR5 SODIMMs and adds dual-channel bandwidth for the supported platform. It is not for systems that require ECC, registered modules, desktop UDIMMs, or a different pin count.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Memory |
| Model name | DDR5 Non-ECC Unbuffered SODIMM Memory |
| Part number | MS44800-818K2 |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 262-Pin DDR5 SODIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL46 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 16 GB 2 × 8 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 262-PIN Non-ECC SODIMM KIT |
Other versions of this model
Power off the Supermicro X14SPN-H, open the memory compartment, align the notch on each 262-pin DDR5 SODIMM with the slot key, press firmly until the side clips click, then verify in BIOS that both 8 GB modules are detected at 5600 MT/s.
No scheduled maintenance is required; the modules have no heat spreader and run at 1.1 V, so only replace them if a stick fails or you need more than 16 GB total capacity.
The CAS latency of 46 cycles at 5600 MT/s sets the baseline response time; under continuous heavy workloads the memory controller will hit that timing ceiling before thermal throttling becomes a factor.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?