We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit-board SODIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR5 5600MHz CL46 1.1V 262-pin SODIMM kit for Supermicro X14SAV-LVDS

SKU CH-QQKV-FK651

A 16 GB DDR5 SODIMM kit with two 8 GB modules running at 5600 MHz, CL46 latency and 1.1 V for the Supermicro X14SAV-LVDS motherboard

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB 2X8GB

  • Exact-match 16 GB kit runs at DDR5-5600 CL46 1.1 V
  • Verified fit for Supermicro X14SAV-LVDS with 262-pin SODIMM form factor
  • Built with major OEM chips from Samsung, Micron or Hynix
  • Dual-rank 1Rx8 organisation recognised at full capacity by the memory controller
  • Lifetime replacement warranty with free US-based technical support

Exact-fit DDR5 SODIMM kit for Supermicro X14SAV-LVDS

This 16 GB kit delivers two 8 GB DDR5 5600 modules in the 262-pin SODIMM form factor the Supermicro X14SAV-LVDS motherboard requires. The 1Rx8 rank, 1.1 V voltage and CL46 latency match the board's memory controller specification so the system recognises the full capacity and runs at rated speed.

Replaces mismatched or slower DDR5 modules

When existing memory is a single stick, a lower frequency or incorrect timing, this kit restores dual-channel bandwidth and the rated 5600 MT/s data rate. The upgrade is worthwhile when the platform currently runs below PC5-44800 or operates in single-channel mode.

Build integration: 262-pin SODIMM slot.

The modules slot directly into the board's SODIMM sockets and draw 1.1 V with no additional power or cooling hardware. The low-profile design leaves clearance for tight chassis layouts. Buyers needing ECC, registered DIMMs or capacities beyond 16 GB should verify their system manual first.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $162.99
Cheaper than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $10.19 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered SODIMM Memory
Part numberMS44800-818K2
Total capacity16 GB (2 × 8 GB)
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB 2 × 8 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 262-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 262-pin SODIMM form factor fit the Supermicro X14SAV-LVDS motherboard slots?

Yes, the kit uses the 262-pin DDR5 SODIMM form factor that the Supermicro X14SAV-LVDS requires, not a desktop UDIMM, so it seats directly in the board's SO-DIMM sockets.

What installation step is most often missed when adding this 1Rx8 DDR5 kit?

The board's manual specifies a population order for the two 8 GB modules; installing them in the wrong slot sequence can prevent the system from recognising the full 16 GB at 5600 MHz.

Will the modules need a firmware update or heat-spreader replacement later?

No firmware updates apply to these Non-ECC Unbuffered SODIMMs, and the kit ships without heat spreaders, so there is no spreader to replace during the product's lifetime.

More in Model-Specific Memory Upgrades

Similar items