We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 UDIMM sticks without heat spreaders in a 16 GB kit

NEMIX RAM

NEMIX RAM 16GB 2x8GB DDR5 5600 CL46 UDIMM Kit Supermicro X14SAZ-F

SKU CH-EMN6-E2CJE

A 16 GB DDR5-5600 dual-channel kit built with major OEM chips and tested for the Supermicro X14SAZ-F motherboard

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB 2X8GB

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR5 5600 speed matches board-rated frequency
  • CL46 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro X14SAZ-F slots
  • Major OEM chips tested for stability at rated specs

Exact DDR5 upgrade kit

This 16 GB kit contains two 8 GB DDR5 5600 UDIMM modules built to the exact rank, voltage and timing the Supermicro X14SAZ-F expects. The 1Rx8 Non-ECC unbuffered design matches the board's memory population rules so the full capacity is recognised at rated speed. Builders needing ECC or registered modules should look elsewhere. ||

Sustained throughput stability

Major OEM chips from Samsung Micron or Hynix are tested at the specified 1.1 V CL46 5600 MT/s setting to maintain data integrity during long workloads. The kit delivers consistent bandwidth without down-clocking when the memory controller is under continuous pressure. Systems that require higher frequencies or tighter latencies will not reach those targets with this kit. ||

Thermals and power profile

Operating at 1.1 V the modules draw minimal power and run cool without a heat spreader in typical desktop airflow. Acoustic impact is negligible because no active cooling is attached. Builds with restricted air circulation or extreme overclocking goals may need additional thermal management.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $219.99
Cheaper than about 58% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $13.75 per GB
Pricier than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-818K2
Total capacity16 GB (2 × 8 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB 2 × 8 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power will the 1.1 V DDR5-5600 kit draw when the system runs all day?

The modules operate at 1.1 V with a CL46 latency rating. DDR5 moves voltage regulation onto the DIMM itself, so sustained draw stays low and heat output remains modest without a heat spreader.

What must the motherboard provide for this 288-pin UDIMM kit to function?

The board needs DDR5 UDIMM slots that accept 1.1 V, non-ECC, unbuffered 1Rx8 modules at 5600 MT/s. The Supermicro X14SAZ-F is verified for this exact configuration.

Will the CL46 5600 MT/s kit run at its rated speed on the Supermicro X14SAZ-F alongside any existing DIMMs?

The kit is spec-matched to the X14SAZ-F memory-population rules. If the board supports mixed ranks, the memory controller will train all installed DIMMs to the highest common speed and latency.

More in Model-Specific Memory Upgrades

Similar items