We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM for Supermicro X13SAW-TLN4F memory upgrade

SKU CH-TJK9-7E3C6

A 16 GB DDR5 5600 MHz UDIMM with CL46 latency and 1.1 V operation, validated for the Supermicro X13SAW-TLN4F motherboard

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB

  • Exact 16GB DDR5-5600 spec match for Supermicro X13SAW-TLN4F
  • 1Rx8 non-ECC UDIMM fits board slot and population rules
  • Major OEM Samsung, Micron or Hynix chips tested at rated speed
  • CL46 latency at 1.1V runs at full DDR5-5600 bandwidth
  • Lifetime replacement warranty with free US-based technical support

Exact-Match DDR5 Upgrade for Supermicro X13SAW-TLN4F

This NEMIX RAM module delivers 16GB of DDR5 memory rated at 5600MHz with CL46 timings. It uses a 1Rx8 non-ECC unbuffered design at 1.1V. The 288-pin UDIMM form factor matches the motherboard's requirements precisely.

Fits Single DIMM Slot Without ECC or Buffering

The module installs directly into a standard DDR5 UDIMM slot on the Supermicro X13SAW-TLN4F board. Its unbuffered, non-ECC architecture means no registered or server-class memory is needed. Major OEM chips from Samsung, Micron or Hynix provide tested stability at rated speed and voltage.

Suits Builders Needing a Verified 16GB DDR5 Module

This kit serves users upgrading or repairing the specified Supermicro platform with a single validated stick. Buyers who want more storage than 16GB provides should look elsewhere. Builders requiring ECC error correction or registered buffering must choose a different module type. Systems not based on the X13SAW-TLN4F motherboard will not guarantee compatibility.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $215.99
Cheaper than about 58% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $13.50 per GB
Pricier than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 16GB DDR5 5600MHz module run at its rated CL46 latency continuously under heavy workloads?

Yes, the module is tested for stability at the rated CL46 timing, 5600MHz speed and 1.1V voltage so it maintains those settings during sustained use.

Does the 1.1V unbuffered DDR5 UDIMM generate noticeable heat or noise during all-day operation?

The module has no heat spreader and runs at the standard 1.1V DDR5 voltage; it produces no noise and relies on normal case airflow for cooling.

Must my Supermicro X13SAW-TLN4F motherboard already support DDR5 5600MHz PC5-44800 1Rx8 unbuffered memory for this kit to work?

Yes, the board must accept 288-pin DDR5 UDIMMs at 5600MHz with 1Rx8 non-ECC organisation; consult the manual for supported capacities and population order.

More in Model-Specific Memory Upgrades

Similar items