NEMIX RAM 32GB (4x8GB) DDR4-2666 ECC UDIMM CL19 1.2V 1Rx8 memory upgrade
- 32 GB (4 × 8 GB)
- 288-Pin DDR4 ECC UD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR4 ECC UDIMM at 2933 MHz CL21 1.2 V 288-pin, verified for Supermicro X12SAE and X12SCA-F motherboards
This 32 GB DDR4 module runs at 2933 MT/s with CL21 latency and 1.2 V operation. It is an unbuffered ECC UDIMM built with a 2Rx8 rank structure on a 288-pin PCB. The part is validated for Supermicro X12SAE and X12SCA-F motherboards that require DDR4 2933 PC4-23400 ECC memory.
The module fits systems that accept unbuffered ECC UDIMMs at the specified speed and rank. Builders needing registered DIMMs, SODIMMs, non-ECC memory, or a different voltage should select a different part. Capacity beyond a single 32 GB stick depends on the motherboard's slot count and population rules.
The 2Rx8 organisation at 1.20 V is the specific electrical signature the memory controller expects. A mismatched rank or voltage will prevent the system from recognising the full 32 GB or running at the rated 2933 MT/s. Verify the board's approved DIMM population order before installation.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Memory |
| Model name | DDR4 ECC Unbuffered UDIMM Memory |
| Part number | ME23400-328K1 |
| Total capacity | 32 GB |
| Product type | 288-Pin DDR4 ECC UDIMM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 32 GB DDR4 2933 MHz PC4-23400 2Rx8 1.2 V 288-PIN ECC UDIMM KIT |
Other versions of this model
This kit provides exactly 32GB in a single 2Rx8 ECC UDIMM that matches the board's required rank, voltage, and timing so the controller recognises full capacity at the rated 2933MHz speed.
The module runs at DDR4-2933 (PC4-23400) with CL21 latency at 1.2V, giving the memory controller the precise frequency and timing it expects for stable operation at full rated throughput.
The 288-pin unbuffered ECC form factor fits only DDR4 UDIMM slots — not RDIMM or SODIMM sockets — and the ECC function corrects single-bit errors on the fly to prevent silent data corruption.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?