We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM Supermicro X13SAQ memory upgrade

SKU CH-VG4N-6PAYD

16 GB DDR5 5600 MHz CL46 1.1 V 288-pin UDIMM validated for Supermicro X13SAQ boards

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB

  • Exact-match 16 GB DDR5-5600 CL46 1.10 V for full-speed recognition
  • Verified fit for Supermicro X13SAQ 288-pin UDIMM slot
  • Major OEM chips tested stable at rated speed and timing
  • Single-rank 1Rx8 Non-ECC unbuffered design matches board population rules
  • Lifetime replacement warranty with free US-based technical support

Exact-match DDR5 upgrade for Supermicro X13SAQ

This 16GB DDR5-5600 module is built to the precise rank, voltage, and timing the Supermicro X13SAQ motherboard expects. It installs as a single 288-pin unbuffered UDIMM and is recognised at full capacity without manual configuration. The 1Rx8 organisation and 1.1V operation match the board's native memory population rules.

16GB capacity at CL46 5600MHz

The stick delivers 16GB of non-ECC memory running at PC5-44800 speeds with a CAS latency of 46. It handles everyday multitasking, office suites, and light content creation with comfortable headroom. Heavy workloads such as large-scale virtualisation, high-resolution video timelines, or in-memory databases will exhaust the single-module capacity before the bandwidth limit is reached.

Replaces slower or smaller DDR5 DIMMs

Swapping out an 8GB DDR5-4800 module or a mismatched kit removes a capacity bottleneck and restores the platform's rated 5600MT/s data rate. The upgrade is worthwhile when the system currently runs below the board's maximum supported speed or when total memory falls short of 16GB. It does not suit builds that require ECC error correction, registered signalling, or SODIMM form factors.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $214.99
Cheaper than about 58% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $13.44 per GB
Pricier than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 16 GB DDR5 5600 module run at its rated speed alongside slower DDR5 DIMMs already installed in my Supermicro X13SAQ?

The board will clock all installed modules down to the speed of the slowest DIMM, so this kit will operate at the lower frequency if mixed with slower memory.

How can I confirm the 288-pin UDIMM is detected at 5600 MHz with CL46 timings after installation?

Enter the BIOS or use a system-information utility such as CPU-Z to verify the memory frequency reads 5600 MT/s and the CAS latency shows 46.

Does the package include only the memory module or are any additional items such as a heat spreader or cables provided?

The box contains the 16 GB DDR5 5600 1Rx8 UDIMM itself; no heat spreader, cables or other accessories are included.

More in Model-Specific Memory Upgrades

Similar items