We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 ECC RDIMM CL46 2Rx4 1.1V Supermicro X14SDV-36CE-SP3F memory upgrade

SKU CH-Q5Y0-QPZ6R

A 192 GB DDR5 kit of two 96 GB registered ECC RDIMMs running at 5600 MHz with CL46 timing and 1.1 V for the Supermicro X14SDV-36CE-SP3F motherboard

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

  • 192 GB total capacity from a matched 2 x 96 GB kit
  • DDR5 5600 speed with CL46 latency for rated server performance
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-36CE-SP3F memory slots

Exact-fit DDR5 RDIMM kit for Supermicro

This 192GB kit contains two 96GB DDR5 5600 modules built to the 288-pin RDIMM form factor the board requires. Registered ECC architecture ensures each slot is recognised at full capacity and runs at its rated speed. The 2Rx4 rank configuration matches the memory controller expectations for stable population.

Sustained enterprise stability

Registered buffering offloads the memory controller so every slot stays fully populated under continuous load. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during production workloads. The 1.1V operating voltage keeps power draw consistent across long operating periods.

2Rx4 rank and 1.1V spec decide compatibility

The motherboard's memory-population rules require this exact rank structure and voltage for full-capacity recognition. A different rank or voltage will cause the system to reject the modules or run them at reduced speeds. Verify your manual for approved DIMM population order before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,336.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $27.80 per GB
Pricier than about 78% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 2 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 1.10V DDR5 5600 modules add noticeable heat or power draw when the server runs all day?

The kit operates at the standard DDR5 1.10V level and uses registered ECC RDIMMs that offload the memory controller, so heat and power stay within normal server limits for continuous operation.

What must the motherboard provide for these 288-pin RDIMMs to function?

The Supermicro X14SDV-36CE-SP3F must support DDR5 5600 registered ECC memory with 2Rx4 organisation and 1.1V operation, plus follow its documented DIMM population order for two 96GB modules.

Can the 2Rx4 registered ECC design work alongside other DDR5 RDIMMs already installed in the same server?

Mixing is only reliable when the existing modules match the same DDR5 5600 speed, 2Rx4 rank, registered ECC type and 1.1V voltage, and the motherboard manual approves the combined population.

More in Model-Specific Memory Upgrades

Similar items