We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 288GB 6x48GB DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-96VQ-11MSP

Six 48 GB DDR5 ECC Registered DIMMs running at 4800 MHz with CL40 latency and 1.1 V for the Supermicro H13SSH-E motherboard

  • Total capacity288 GB (6 × 48 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 288GB 6X48GB

Show 30 more
  • 288 GB total capacity for dense server workloads with six 48 GB modules
  • DDR5 4800 speed rated at PC5-38400 for high-throughput data paths
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • CL40 latency at 1.1 V balances responsiveness with efficient power draw
  • Validated for Supermicro H13SSH-E motherboard ensuring correct 288-pin RDIMM fit

Exact-match upgrade kit

This 288GB kit contains six 48GB DDR5 4800 Registered ECC RDIMMs tuned to CL40 at 1.1V. It is built for administrators who need the precise rank, voltage and timing the server memory controller expects so the full capacity is recognised and runs at rated speed.

Verified fitment for Supermicro H13SSH-E

The modules use the 288-pin RDIMM form factor that this motherboard requires and are spec-matched to its population rules. Registered architecture offloads the memory controller so every slot can run fully populated, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Capacity and headroom

Six dual-rank 48GB modules deliver 288GB of addressable memory for large databases, virtualization clusters or in-memory analytics. Headroom ends when the board’s maximum supported capacity or approved population order is reached, so the manual must be consulted before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $6,226.99
Pricier than about 82% of the 21,161 comparable items (median $397.99).
Total capacity 288 GB (6 × 48 GB)
Higher than about 81% of the 20,941 comparable items (median 32 GB).
Price per GB $21.62 per GB
Pricier than about 67% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-4828K6
Total capacity288 GB (6 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items288 GB 6 × 48 GB DDR5 4800 MHz PC5-38400 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does DDR5 4800 CL40 become the throughput bottleneck before the 288GB capacity fills under sustained full-slot load?

The kit runs at DDR5 4800 with CL40 timings at 1.1V across all six registered DIMMs; the memory controller on the Supermicro H13SSH-E determines whether frequency or capacity saturates first in your workload.

What thermals and power draw should I expect from six 48GB RDIMMs running continuously on the H13SSH-E?

Each module operates at 1.1V without heat spreaders; total power scales with all six slots populated, and airflow across the 288-pin RDIMM sockets manages thermals per the motherboard design.

What motherboard and firmware must already be in place for this 6x48GB kit to be recognised at full speed?

A Supermicro H13SSH-E motherboard with BIOS that supports DDR5 4800 Registered ECC 2Rx8 DIMMs and the correct population order for six modules is required.

More in Model-Specific Memory Upgrades

Similar items