We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 48GB DDR5 4800 PC5-38400 2Rx8 CL40 1.1V ECC RDIMM Supermicro H13SST-GC memory upgrade

SKU CH-QNMH-8E6XQ

48GB DDR5 4800 ECC RDIMM with CL40 latency and 1.1V registered operation, validated for the Supermicro H13SST-GC motherboard

  • Total capacity48 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact-match 48 GB DDR5-4800 for Supermicro H13SST-GC
  • Registered ECC RDIMM prevents silent data corruption
  • 2Rx8 CL40 1.1 V runs at rated speed fully populated
  • 288-pin DDR5 form factor fits the board's slots
  • Lifetime replacement warranty with US-based technical support

Exact-fit DDR5 upgrade for Supermicro H13SST-GC

This 48GB DDR5 4800 PC5-38400 registered ECC RDIMM is built to the precise rank, voltage and timing the Supermicro H13SST-GC memory controller expects. It delivers 48GB at 1.1V with CL40 latency in a 2Rx8 configuration. The module is intended for servers and workstations that require registered memory with error correction.

Straightforward DIMM installation

The 288-pin RDIMM seats in the standard DDR5 slots on the H13SST-GC board. Because the platform uses registered memory, every slot can run fully populated at rated speed when the correct population order is followed. The most common issue is inserting modules in the wrong sequence or mixing ranks, which prevents the system from recognising the full capacity. No heat spreader is fitted, so clearance is minimal, but the motherboard manual must be consulted for the approved slot order before fitting.

Verify capacity limits

Check the Supermicro H13SST-GC manual for the maximum supported capacity per DIMM and the required population sequence for 2Rx8 registered modules. Confirm the board's qualified vendor list includes this specification and that the BIOS version in use supports the full 48GB density. Systems that only accept unbuffered UDIMMs or SODIMMs cannot use this RDIMM.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,095.99
Pricier than about 61% of the 21,161 comparable items (median $397.99).
Total capacity 48 GB
Higher than about 55% of the 20,941 comparable items (median 32 GB).
Price per GB $22.83 per GB
Pricier than about 68% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-4828K1
Total capacity48 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items48 GB DDR5 4800 MHz PC5-38400 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I confirm the module runs at 4800 MT/s with CL40 after installing it in the Supermicro H13SST-GC?

Enter the BIOS or use a hardware-info utility and verify the memory speed reads 4800 MT/s and CAS latency shows CL40; the registered ECC design ensures the controller recognises the 2Rx8 rank at its rated timing.

What comes in the package and is anything else required for installation?

The box contains a single 48 GB 288-pin DDR5 RDIMM; no heat spreader or extra cables are included, and no separate components are needed beyond a compatible DIMM slot on the motherboard.

Which capacity or version should I choose for the H13SST-GC?

This part number MR38400-4828K1 is a 48 GB DDR5-4800 2Rx8 registered ECC module built to the board's exact voltage and rank requirements; select it when your configuration calls for a 48 GB registered DIMM.

More in Model-Specific Memory Upgrades

Similar items