We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 576GB 12x48GB DDR5 4800 CL40 1.1V 2Rx8 ECC Registered RDIMM 288-Pin Kit for Supermicro H13DSG-O-CPU

SKU CH-7D7Y-ASGCC

12-module DDR5-4800 kit delivers 576GB of registered ECC memory at CL40 and 1.1V for the Supermicro H13DSG-O-CPU motherboard

  • Total capacity576 GB (12 × 48 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 576GB total capacity from twelve 48GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency at 1.1V for rated performance
  • Registered ECC RDIMM architecture corrects errors and buffers signals for stability
  • 288-pin 2Rx8 form factor matches Supermicro H13DSG-O-CPU motherboard requirements
  • Lifetime replacement warranty with US-based technical support included

System-Specific 576GB DDR5 Kit

This 576GB kit contains twelve 48GB DDR5-4800 RDIMMs built for the Supermicro H13DSG-O-CPU motherboard. It delivers the exact rank, voltage and timing the board's memory controller expects for full-capacity recognition. Registered ECC architecture suits enterprise workloads that demand data integrity across every slot.

DDR5-4800 Registered ECC Limits

DDR5-4800 (PC5-38400) at CL40 and 1.1V sets the speed ceiling for this platform. Registered buffering offloads the memory controller so all twelve slots can run fully populated at rated frequency. ECC corrects single-bit errors on the fly, preventing silent corruption that would otherwise reach production data.

Twelve-Module RDIMM Build

Each 288-pin module uses a 2Rx8 organisation with major OEM chips and no heat spreader, relying on server chassis airflow for cooling. The registered design adds a buffer chip that stabilises signals across the full twelve-DIMM population. Verify your motherboard manual for approved population order and maximum supported capacity before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $13,374.99
Pricier than about 90% of the 21,161 comparable items (median $397.99).
Total capacity 576 GB (12 × 48 GB)
Higher than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $23.22 per GB
Pricier than about 68% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-4828K12
Total capacity576 GB (12 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items576 GB 12 × 48 GB DDR5 4800 MHz PC5-38400 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose this 12-module 576GB kit or a smaller capacity for my Supermicro H13DSG-O-CPU?

The kit provides 12 x 48GB modules to fill every slot the H13DSG-O-CPU supports, giving the full 576GB the board can address with registered ECC DDR5.

What does the DDR5-4800 CL40 rating actually deliver once the modules are installed in the server?

The memory controller will run the kit at 4800 MT/s with a CAS latency of 40 cycles at 1.1V, the exact speed and timing the motherboard's qualified vendor list specifies.

How does the 288-pin registered ECC interface affect what the system can do?

The 288-pin RDIMM form factor with registered buffering and ECC lets the H13DSG-O-CPU populate all channels at full capacity while correcting single-bit errors on the fly.

More in Model-Specific Memory Upgrades

Similar items