We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5-5600 ECC Registered RDIMM memory upgrade for GIGABYTE MZ33-CP1

SKU CH-9TY8-EX3Z2

A 64GB dual-channel DDR5 kit with ECC and registered buffering for the GIGABYTE MZ33-CP1 motherboard

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 64GB 2X32GB

Show 24 more
  • 64 GB capacity with two 32 GB modules for full-channel bandwidth
  • DDR5-5600 PC5-44800 speed matches the board's rated memory clock
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V CL46 2Rx8 timing aligns with the memory controller's exact requirements
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard slots

Exact-match DDR5 RDIMM kit for GIGABYTE MZ33-CP1

This NEMIX RAM kit delivers 64 GB across two 32 GB DDR5-5600 registered ECC modules built to the PC5-44800 standard. It targets administrators upgrading the GIGABYTE MZ33-CP1 motherboard where registered DIMMs are mandatory and every slot must run at full rated speed.

Registered DDR5 limits slot count

The registered architecture offloads the memory controller so all slots can be fully populated, but the MZ33-CP1 manual dictates exact population sequences and maximum capacity per channel. Installing modules outside the approved order or exceeding the board's validated rank limit will prevent the system from posting at 5600 MT/s.

2Rx8 rank structure decides full-capacity

Each module uses a 2Rx8 organisation that the board's memory controller expects for 64 GB operation at CL46 and 1.1 V. If the platform requires a different rank-per-DIMM layout or a lower voltage, the kit will not train at its rated frequency and the capacity will not be recognised.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,984.99
Pricier than about 68% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $31.02 per GB
Pricier than about 89% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items64 GB 2 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 64GB (2x32GB) kit or a different capacity for my GIGABYTE MZ33-CP1?

The 64GB kit provides two 32GB modules that match the board's DDR5-5600 RDIMM requirement; consult your motherboard manual for approved population rules and maximum supported capacity before deciding.

What does the DDR5-5600 speed rating deliver once installed in the server?

The modules run at 5600 MT/s with CL46 latency at 1.10V, giving the memory controller the exact timing and voltage it expects for full-speed operation across both DIMMs.

How does the 288-pin Registered ECC interface affect real-world stability?

The registered buffer reduces electrical load on the controller so all slots can be populated at rated speed, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

More in Model-Specific Memory Upgrades

Similar items