We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 5600 64GB 2x32GB ECC RDIMM CL46 1.1V 2Rx8 288-pin memory upgrade

SKU CH-V49F-0QXJ8

A 64 GB DDR5 5600 kit of two 32 GB ECC registered RDIMMs, CL46 at 1.1 V, validated for the GIGABYTE MZ73-LM2 motherboard

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 64 GB capacity from a matched 2 × 32 GB kit
  • DDR5 5600 speed with CL46 latency for rated throughput
  • 1 V operation keeps power draw low
  • Registered ECC design corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM2 motherboard

Exact DDR5-5600 ECC RDIMM kit for GIGABYTE MZ73-LM2

This 64 GB kit contains two 32 GB DDR5-5600 Registered ECC modules built to the PC5-44800 standard. It is intended for administrators upgrading or populating the GIGABYTE MZ73-LM2 motherboard with memory that matches the board's qualified vendor list.

Keyed 288-pin RDIMM form factor prevents

The modules use the 288-pin Registered DIMM layout required by the MZ73-LM2, so they only fit the correct server slots and cannot be inserted into UDIMM or SODIMM sockets. Verify the motherboard manual for approved population order and maximum supported capacity before seating the DIMMs, as incorrect slot filling or exceeding the platform limit will prevent boot.

Registered ECC with 2Rx8 organisation at 1.1 V

The combination of Registered buffering, ECC error correction, dual-rank 2Rx8 architecture and 1.1 V operation is the single specification that determines compatibility with the MZ73-LM2 memory controller; a different rank count, voltage or unbuffered type will not be recognised at full speed or capacity.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,998.99
Pricier than about 68% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $31.23 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items64 GB 2 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I confirm the kit runs at 5600 MHz with CL46 after installation?

Enter the BIOS or UEFI and verify the memory frequency shows 5600 MT/s and CAS latency reads 46; the registered ECC design lets the controller train at the rated speed when populated per the motherboard manual.

What ships in the package and what must I source separately?

The box contains the 64 GB kit as two 32 GB 288-pin DDR5 RDIMMs; no heat spreaders, cables, or tools are included, and the motherboard itself is purchased separately.

Which capacity version should I choose for the GIGABYTE MZ73-LM2?

Select the 64 GB 2 x 32 GB DDR5-5600 RDIMM kit (part MR44800-328K2) — it matches the board's registered ECC requirement, 1.1 V voltage, 2Rx8 rank, and 288-pin form factor.

More in Model-Specific Memory Upgrades

Similar items