We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5-4800 CL40 1.1V ECC RDIMM 1Rx8 Supermicro H13SSH

SKU CH-QQJ3-MBT09

A 64 GB registered ECC DDR5 kit of four 16 GB modules at 4800 MT/s with CL40 timing and 1.1 V, built for the Supermicro H13SSH motherboard

  • Total capacity64 GB (4 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact-match DDR5-4800 CL40 1.1V ECC RDIMM kit for Supermicro H13SSH
  • 64GB capacity across four 16GB modules enables full population at rated speed
  • Registered buffer offloads memory controller for stable fully populated operation
  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • Built with major OEM Samsung Micron Hynix chips for enterprise reliability

Supermicro H13SSH memory kit

This 64GB kit contains four 16GB DDR5 RDIMM modules built for the Supermicro H13SSH motherboard. Each module runs at 4800MHz with CL40 latency at 1.1V. The registered ECC design matches the board's memory-controller requirements for full-capacity recognition.

Suited for populated server slots

The 1Rx8 registered ECC layout lets every slot run fully populated while correcting single-bit errors on the fly. Builders needing unbuffered UDIMM or SODIMM form factors should look elsewhere because this kit uses the 288-pin RDIMM interface the H13SSH requires.

Four modules at rated speed

Four 16GB modules deliver 64GB total capacity at the specified DDR5-4800 data rate. The kit handles workloads that fit within this capacity and speed envelope; configurations demanding larger densities or higher frequencies exceed what this package provides.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,707.99
Pricier than about 66% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (4 × 16 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $26.69 per GB
Pricier than about 74% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-618K4
Total capacity64 GB (4 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 4 × 16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does my Supermicro H13SSH motherboard need a specific DIMM population order for this 64GB kit?

The kit is spec-matched to the H13SSH memory-population rules; consult your motherboard manual for the approved slot sequence so all four 16GB modules are recognised at full capacity.

Can I mix these Registered ECC RDIMMs with unbuffered UDIMMs already installed in the server?

No, the H13SSH requires 288-pin Registered RDIMMs; mixing registered and unbuffered modules prevents the memory controller from initialising the array.

How can I verify the kit is running at DDR5-4800 CL40 1.1V after installation?

Enter the BIOS or use a hardware-monitoring utility to confirm the memory frequency reads 4800 MT/s, CAS latency shows CL40, and the DIMM voltage reports 1.10V.

More in Model-Specific Memory Upgrades

Similar items