We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 6400MHz CL52 2Rx4 1.1V ECC Registered RDIMM GIGABYTE MZ73-LM0 memory upgrade

SKU CH-1JNB-NF34F

96GB DDR5 6400MHz ECC Registered RDIMM with 2Rx4 organisation, CL52 latency and 1.1V operation for the GIGABYTE MZ73-LM0 motherboard

  • Total capacity96 GB
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 24 more
  • 96 GB capacity lets the GIGABYTE MZ73-LM0 run fully populated at rated speed
  • DDR5 6400 CL52 1.1 V timing matches the board's memory controller for immediate recognition
  • Registered 2Rx4 ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits the MZ73-LM0 slots without adapter or mismatch
  • Built with Samsung, Micron or Hynix chips for enterprise-grade reliability

Capacity and Form Factor

This is a 96GB DDR5 Registered ECC RDIMM kit built to the 288-pin server standard. It operates at 6400MHz with CL52 latency and a 1.10V supply, using a 2Rx4 rank organisation that matches the memory controller expectations of the target platform.

Fitment and Use Case

It suits administrators upgrading a GIGABYTE MZ73-LM0 motherboard that requires registered DDR5 modules with ECC. Builders needing unbuffered UDIMMs, non-ECC memory, or a different pin count should look elsewhere because this kit will not function in those configurations.

Package Contents and Effect

The package delivers a single 96GB module ready for installation in a validated slot population. No heat spreader is included, so airflow across the PCB must be provided by the server chassis. The registered buffer and ECC logic maintain data integrity at full capacity across all populated channels.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,678.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $27.91 per GB
Pricier than about 78% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items96 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Must the GIGABYTE MZ73-LM0 motherboard be populated with 288-pin DDR5 RDIMM slots to install this 96GB kit?

Yes, this kit uses the 288-pin DDR5 RDIMM form factor and requires a motherboard with matching registered DIMM slots; the MZ73-LM0 provides those slots.

Can I mix this 2Rx4 registered ECC module with existing unbuffered UDIMMs on the same MZ73-LM0 board?

No, registered RDIMMs and unbuffered UDIMMs cannot be mixed on the same memory controller; all populated slots must use registered modules.

How do I confirm the module runs at DDR5 6400 CL52 1.1V after installation?

Check the BIOS memory information or a tool like dmidecode; it should report 6400 MT/s, CAS latency 52, 1.1 V and registered ECC status.

More in Model-Specific Memory Upgrades

Similar items