We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5-5600 96GB (6x16GB) ECC RDIMM CL46 1.1V 288-Pin Kit for Gigabyte MZ23-SU0 memory upgrade

SKU CH-XHMW-BCCCD

Six 16 GB DDR5-5600 registered ECC RDIMMs at CL46 and 1.1 V deliver a 96 GB upgrade validated for the Gigabyte MZ23-SU0

  • Total capacity96 GB (6 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB 6X16GB

Show 24 more
  • 96 GB total capacity lets your Gigabyte MZ23-SU0 run fully populated at rated speed
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • DDR5 5600 MT/s CL46 1.1 V timing matches the board's exact controller requirements
  • 6 × 16 GB 1Rx8 modules fill every slot for maximum density without down-clocking
  • 288-pin RDIMM form factor is the precise fit the MZ23-SU0 memory population rules demand

Exact-match server kit

This NEMIX RAM kit delivers 96 GB of DDR5 registered ECC memory across six 16 GB RDIMMs. It is built for administrators upgrading a Gigabyte MZ23-SU0 motherboard that requires the precise rank, voltage and timing profile the board's memory controller expects.

288-pin RDIMM form factor

The modules use the 288-pin registered DIMM form factor this platform requires, not an unbuffered UDIMM or SODIMM alternative. Registered architecture offloads the memory controller so every slot runs fully populated at the rated 5600 MT/s speed with CL46 latency at 1.1 V.

Enterprise stability in a populated chassis

ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots in production workloads. The kit frees you from mixing modules of different ranks or voltages, but it does not suit systems that only accept unbuffered memory or boards with fewer than six compatible slots.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,682.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (6 × 16 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $27.95 per GB
Pricier than about 78% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K6
Total capacity96 GB (6 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items96 GB 6 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the DDR5-5600 CL46 modules run at their rated 5600 MT/s speed in a Gigabyte MZ23-SU0 with all six slots populated?

Yes, the kit is spec-matched to the MZ23-SU0 so the memory controller recognises the 1Rx8 registered ECC DIMMs at full 5600 MT/s when all six slots are filled.

Does the PC5-44800 rating limit the transfer rate to 5600 MT/s even if the platform supports higher DDR5 speeds?

PC5-44800 is the JEDEC standard name for DDR5-5600; the modules are validated at 5600 MT/s and will not run faster unless the board and BIOS explicitly support overclocking registered ECC DIMMs.

Do these 288-pin RDIMMs need a heat spreader or extra clearance to fit the MZ23-SU0 DIMM slots?

No, the modules have no heat spreader and use the standard 288-pin RDIMM height, so they fit the MZ23-SU0 slots without additional clearance.

More in Model-Specific Memory Upgrades

Similar items