We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules without heat spreaders, 288-pin, 96GB each

NEMIX RAM

NEMIX RAM DDR5 4800 1.1TB 12x96GB ECC RDIMM Supermicro H13SSW memory upgrade

SKU CH-6WRT-H9PQ7

1.1 TB DDR5-4800 ECC registered kit with twelve 96 GB modules, 2Rx4 rank, CL40 latency and 1.10 V operation for Supermicro H13SSW servers

  • Total capacity1.1 TB (12 × 96 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 1.1TB 12X96GB

Show 24 more
  • 1TB total capacity from 12 matched 96GB modules
  • DDR5 4800 speed with CL40 latency at 1.10V
  • Registered ECC RDIMM prevents data errors under load
  • 2Rx4 dual-rank layout maximises density per slot
  • 288-pin form factor built for Supermicro H13SSW

Exact-Match Server Memory Kit

This 1.1 TB DDR5 kit contains twelve 96 GB registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SSW motherboard expects. The modules run at DDR5-4800 (PC5-38400) with CL40 latency at 1.10 V, allowing the server to recognise full capacity and operate at rated speed immediately.

Who This Suits and Who Should Look Elsewhere

System administrators upgrading a Supermicro H13SSW platform will find the 288-pin RDIMM form factor and registered architecture match the board's population rules. Buyers who need unbuffered UDIMMs, SODIMMs, a different capacity per module, or memory for any other motherboard model cannot use this kit.

The Deciding Specification

Twelve 96 GB modules deliver 1.1 TB total capacity in a single verified kit for the Supermicro H13SSW. If your server requires a different module count, density or form factor, this part will not fit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $34,801.99
Pricier than about 94% of the 21,161 comparable items (median $397.99).
Total capacity 1.1 TB (12 × 96 GB)
Higher than about 94% of the 20,941 comparable items (median 32 GB).
Price per GB $31.64 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-9624K12
Total capacity1.1 TB (12 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.1 TB 12 × 96 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power does the 1.10V DDR5 4800 kit draw when the Supermicro H13SSW runs fully populated all day?

Each 96GB module operates at 1.10V DDR5 standard voltage; total system draw depends on the H13SSW memory controller and workload, so consult the motherboard manual for populated-slot power figures.

What motherboard slot configuration does the 12 x 96GB RDIMM kit require on the H13SSW?

The kit uses 288-pin DDR5 RDIMM form factor; the H13SSW manual defines the exact population order and maximum capacity per channel for 2Rx4 registered modules.

Will the CL40 2Rx4 registered ECC modules work alongside any existing DDR5 RDIMMs already installed in the H13SSW?

Mixing ranks, latencies or capacities can prevent the H13SSW from running at 4800MHz; the board manual specifies which combinations are validated for stable operation.

More in Model-Specific Memory Upgrades

Similar items