We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 RDIMM memory module with black chips and gold contacts

NEMIX RAM

NEMIX RAM DDR5 4800 96GB CL40 2Rx4 ECC RDIMM Supermicro H13SVW-NT-OS2

SKU CH-CQTN-3CRRN

96GB DDR5 4800 registered ECC RDIMM at CL40, 1.1V, 2Rx4, 288-pin, validated for Supermicro H13SVW-NT-OS2

  • Total capacity96 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 12 more
  • 96 GB DDR5 4800 capacity recognised at full speed
  • CL40 1.1 V timing matches controller expectations exactly
  • 2Rx4 registered ECC architecture prevents silent data corruption
  • 288-pin RDIMM form factor fits Supermicro H13SVW-NT-OS2 slots
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR5-4800 upgrade

This 96 GB DDR5-4800 registered ECC RDIMM is built for the Supermicro H13SVW-NT-OS2 motherboard. It delivers the precise rank, voltage and timing the platform expects so every slot is recognised at full capacity and rated speed.

Sustained-load behaviour

The registered architecture offloads the memory controller, letting a fully populated system run continuously at the rated 4800 MT/s without the signal degradation seen on unbuffered modules. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during long-running workloads.

Replaces lower-capacity RDIMMs

It upgrades systems currently limited by smaller registered DIMMs when the application demands maximum density per slot. The jump is worth it only if the motherboard manual confirms support for 96 GB modules in the required population order.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,783.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $29.00 per GB
Pricier than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power does the 96GB DDR5 4800 module draw at its rated 1.10V voltage?

The module operates at 1.10V, the standard DDR5 voltage. Registered ECC architecture reduces electrical load on the memory controller, helping keep system power draw predictable when all slots are populated.

What motherboard slot and memory population rules does the Supermicro H13SVW-NT-OS2 require for this 288-pin RDIMM?

The board uses 288-pin DDR5 RDIMM slots. Consult the motherboard manual for supported capacities per slot, approved population order, and any BIOS settings needed before installing the 96GB kit.

Will this DDR5 4800 CL40 registered ECC module run at its rated speed alongside slower DDR5 DIMMs already in the server?

The memory controller typically clocks all installed DIMMs to the lowest common speed and loosest timing. Mixing CL40 modules with slower DDR5 will force the kit to run at the slower modules' rated frequency and latency.

More in Model-Specific Memory Upgrades

Similar items