We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips on both sides gold edge connector no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM memory upgrade for Supermicro H13SVW-N

SKU CH-P83X-NX087

96GB DDR5 5600 Registered ECC RDIMM with CL46 latency and 1.1V operation, validated for Supermicro H13SVW-N motherboards

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 12 more

Speed 5600MHz

  • Exact DDR5-5600 96GB RDIMM matches Supermicro H13SVW-N spec for full-speed operation
  • Registered ECC 2Rx4 1.1V design keeps every slot stable at full capacity
  • CL46 latency and PC5-44800 bandwidth deliver rated throughput without tuning
  • 288-pin RDIMM form factor fits the board's required registered memory slots
  • Lifetime replacement warranty with US-based technical support included

96 GB DDR5-5600 ECC RDIMM for Supermicro H13SVW-N

This 96 GB DDR5 5600 (PC5-44800) registered ECC module is built for the Supermicro H13SVW-N motherboard. It runs at 1.1 V with CL46 latency in a 2Rx4 288-pin RDIMM form factor. The registered design lets the board run fully populated at rated speed without downclocking. Major-brand Samsung, Micron or Hynix chips provide enterprise-grade stability.

Upgrades from slower DDR5 or non-ECC DIMMs

Replacing lower-speed DDR5 or unbuffered memory with this CL46 5600 MHz kit restores the bandwidth and error correction the platform expects. The jump is worth it when your workload needs full-capacity population across all slots and silent data-corruption protection. Systems limited to UDIMM or SODIMM form factors cannot accept this module.

Suits admins running fully populated Supermicro

This kit suits administrators who need a verified 96 GB registered ECC DIMM that matches the board's population rules and voltage profile. Builders using consumer motherboards, laptops or any platform that requires unbuffered DIMMs should look elsewhere. Buyers who need heat spreaders or RGB lighting will not find them here.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,840.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $29.59 per GB
Pricier than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 288-pin RDIMM module fit the Supermicro H13SVW-N motherboard DIMM slots?

Yes, the 288-pin DDR5 RDIMM form factor matches the registered DIMM slots required by the Supermicro H13SVW-N motherboard.

What is the correct installation sequence for the 2Rx4 96GB DDR5 5600 ECC RDIMM in the Supermicro H13SVW-N?

Follow the motherboard manual's DIMM population order; install modules in the specified slot sequence for the 2Rx4 registered ECC configuration to be recognised at full 96GB capacity.

Will the 1.1V DDR5 5600 CL46 ECC RDIMM require any firmware updates or component replacements during its service life?

The module operates at the standard 1.1V DDR5 voltage with on-die ECC; no firmware updates or component replacements are needed for the memory itself under normal server operation.

More in Model-Specific Memory Upgrades

Similar items