We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 5600 256GB 2x128GB CL46 ECC RDIMM Supermicro H13SVW-NT memory upgrade

SKU CH-CG84-0A2SD

A 256GB kit of two 128GB DDR5 5600 ECC RDIMMs at CL46 and 1.1V, registered 2Rx4 for the Supermicro H13SVW-NT motherboard

  • Total capacity256 GB (2 × 128 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact-match DDR5-5600 kit runs at rated speed on Supermicro H13SVW-NT
  • 256 GB capacity from two 128 GB modules fully populates supported slots
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • 1 V operation at CL46 matches the board's voltage and timing requirements
  • 288-pin RDIMM form factor fits the motherboard's memory-population rules

Server-grade DDR5 ECC RDIMM kit

This 256 GB kit comprises two 128 GB DDR5 5600 registered ECC modules built for the Supermicro H13SVW-NT motherboard. The 2Rx4 organisation and 1.10 V operation match the board's memory-controller requirements exactly. It is not for systems that accept only unbuffered UDIMMs or SODIMM form factors.

Thermals and power in normal use

Running at the standard 1.10 V keeps power draw low across both DIMMs during typical server workloads. The modules ship without a heat spreader, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping maintain stable operation when all slots are populated.

Build quality and daily handling

Major OEM Samsung, Micron or Hynix chips underpin the lifetime replacement warranty and free US-based technical support. The 288-pin RDIMM connector keys only into registered DIMM slots, so installation follows the motherboard's prescribed population order. Verify the manual for supported capacities and slot sequence before seating the modules.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $7,796.99
Pricier than about 84% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (2 × 128 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $30.46 per GB
Pricier than about 87% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-724K2
Total capacity256 GB (2 × 128 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items256 GB 2 × 128 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 288-pin DDR5 RDIMM modules in the Supermicro H13SVW-NT, and which slot order is the one people get wrong?

Install both 128 GB RDIMMs in the exact DIMM population order listed in the Supermicro H13SVW-NT manual; the board requires registered DDR5 modules in specific channels to recognise the full 256 GB at 5600 MT/s.

What maintenance or replacement will the 2Rx4 ECC RDIMM kit need over its service life?

The modules have no moving parts or heat spreaders; ECC corrects single-bit errors on the fly, and the lifetime replacement warranty covers any module that develops uncorrectable faults.

What limit appears first when the 5600 MT/s CL46 1.1 V kit runs fully populated under sustained load?

The memory controller’s maximum supported capacity and ranked-population rules are the first ceiling; the 2Rx4 registered design lets all slots run at rated speed, but the platform caps total addressable memory.

More in Model-Specific Memory Upgrades

Similar items