We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM sticks in a row, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 1.1TB (12x96GB) CL40 2Rx4 Supermicro H13DSH memory upgrade

SKU CH-GK65-M0BQ0

A 1.1 TB DDR5 4800 ECC registered RDIMM kit of twelve 96 GB modules at CL40, 1.10 V, 2Rx4, validated for Supermicro H13DSH

  • Total capacity1.1 TB (12 × 96 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 1.1TB 12X96GB

Show 30 more
  • 1 TB total capacity from 12 × 96 GB modules for maximum server density
  • DDR5-4800 (PC5-38400) CL40 at 1.10 V runs at rated speed on the H13DSH
  • Registered 2Rx4 ECC RDIMM offloads the memory controller and corrects single-bit errors
  • 288-pin RDIMM form factor matches the Supermicro H13DSH slot requirement exactly
  • Lifetime replacement warranty with US-based technical support included

Exact-match upgrade kit

This 1.1TB kit contains twelve 96GB DDR5 modules built for the Supermicro H13DSH motherboard. Each stick runs at 4800MHz with CL40 timing and 1.10V voltage. The 2Rx4 registered ECC design matches the board's memory controller requirements precisely. The 288-pin RDIMM form factor fits the server's DIMM slots without adapters.

Capacity and headroom

Twelve 96GB modules deliver 1.1TB total capacity for large datasets and virtualisation workloads. Registered architecture allows every slot to run fully populated at rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. The kit is spec-matched to the motherboard's population rules for full recognition.

Thermals noise and power

Modules operate at standard 1.10V DDR5 voltage with no heat spreaders installed. Registered buffering reduces electrical load on the memory controller during sustained use. Passive cooling relies on chassis airflow through the server enclosure. Power draw scales with all twelve slots populated at 4800MHz operation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $32,471.99
Pricier than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 1.1 TB (12 × 96 GB)
Higher than about 94% of the 20,941 comparable items (median 32 GB).
Price per GB $29.52 per GB
Pricier than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-9624K12
Total capacity1.1 TB (12 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.1 TB 12 × 96 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 12x 96GB DDR5 4800 ECC RDIMM kit run at rated speed alongside existing DDR5 modules in my Supermicro H13DSH?

The kit uses 2Rx4 registered ECC DDR5 at 1.10V CL40. For the server to recognise full capacity at 4800 MT/s, all installed DIMMs must match these specifications and follow the board's population rules.

How can I verify the 1.1TB kit is operating correctly after installation?

Enter the BIOS to confirm all 12 modules are detected at 1.1TB total capacity, running at DDR5 4800 with CL40 timings and ECC enabled.

What is included in the box and do I need any extra parts for the Supermicro H13DSH?

The box contains the 12x 96GB DDR5 4800 ECC RDIMM modules only. No heat spreaders, cables or additional hardware are supplied or required for installation.

More in Model-Specific Memory Upgrades

Similar items