We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in a row, bare chips, no heat spreaders

NEMIX RAM

NEMIX RAM 1.1TB 12x96GB DDR5 5600 CL46 ECC RDIMM Supermicro H14DSH

SKU CH-M0JZ-8JJGK

12-module 1.1 TB DDR5 5600 ECC RDIMM kit with CL46 timing and 1.10 V registered operation for Supermicro H14DSH

  • Total capacity1.1 TB (12 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 1.1TB 12X96GB

Show 30 more
  • 1 TB total capacity from twelve 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors on the fly
  • 2Rx4 organisation at 1.10 V matches the memory controller exactly
  • Verified fit for Supermicro H14DSH with 288-pin RDIMM form factor

Server Memory Kit for Supermicro H14DSH

This 1.1TB kit contains twelve 96GB DDR5 5600 RDIMM modules built for the Supermicro H14DSH motherboard. The registered ECC design matches the board's required 288-pin form factor and 2Rx4 rank structure. It is intended for administrators expanding memory capacity in compatible Supermicro servers.

DDR5 5600 Registered ECC Limits

Registered buffering allows full population of all slots at the rated 5600 MT/s speed while ECC corrects single-bit errors during operation. The 1.10V operating voltage and CL46 latency are fixed by the DDR5 5600 standard this kit follows. Modules without registered buffering or ECC will not function in this server platform.

2Rx4 Rank and 1.10V Voltage Decide Fit

The memory controller expects exactly 2Rx4 organization and 1.10V operation across all twelve slots. A different rank count or voltage will prevent the system from recognising the full 1.1TB capacity or running at 5600 MT/s. Verify the motherboard manual for approved population order before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $32,028.99
Pricier than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 1.1 TB (12 × 96 GB)
Higher than about 94% of the 20,941 comparable items (median 32 GB).
Price per GB $29.12 per GB
Pricier than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K12
Total capacity1.1 TB (12 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.1 TB 12 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I buy the 1.1 TB kit with twelve 96 GB modules or a smaller capacity for my Supermicro H14DSH?

The twelve-module 1.1 TB kit fills every slot on the H14DSH, letting the registered ECC design run all channels at the rated DDR5 5600 speed without population gaps.

What does the DDR5 5600 CL46 rating deliver inside a running server?

At DDR5 5600 the modules transfer data at the PC5-44800 rate, while CL46 sets the latency the memory controller expects for stable full-capacity operation.

How does the 288-pin registered ECC interface limit real-world use?

The 288-pin RDIMM form factor only fits server boards that accept registered ECC DIMMs; it cannot be used in desktop UDIMM or laptop SODIMM slots.

More in Model-Specific Memory Upgrades

Similar items