We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 512GB (4x128GB) Supermicro H14SHM memory upgrade

SKU CH-MWJ7-HD771

A 512 GB DDR5 ECC registered DIMM kit built for the Supermicro H14SHM, running at 4800 MT/s with CL40 latency and 1.1 V operation

  • Total capacity512 GB (4 × 128 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 512GB total capacity with four 128GB modules for maximum server memory density
  • DDR5-4800 speed and CL40 latency deliver rated performance on the Supermicro H14SHM
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 10V operation matches the platform's voltage requirement for stable full-population use
  • 288-pin RDIMM form factor fits the motherboard's DIMM slots and population rules

Exact-match DDR5 kit for Supermicro H14SHM

This 512GB kit delivers four 128GB DDR5-4800 registered ECC RDIMMs built to the precise rank, voltage and timing the H14SHM memory controller expects. The 2Rx4 organisation and 1.10V operation let every slot run fully populated at the rated 4800 MT/s without manual tuning.

Sustained-load behaviour with registered ECC

Registered architecture buffers each command so the memory controller stays stable when all four channels are heavily loaded for hours. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during long compute runs or database workloads. CL40 latency remains consistent because the registered design absorbs electrical loading across the full population.

Replaces partial or mixed-capacity configurations

The kit upgrades systems running smaller matched sets or mismatched modules that force the controller to downclock or limit capacity. It is not for boards that accept only unbuffered UDIMMs or that cap registered DIMM support below 512GB. Builders needing a different total capacity or a different motherboard platform should verify their manual before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $15,580.99
Pricier than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 512 GB (4 × 128 GB)
Higher than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $30.43 per GB
Pricier than about 87% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-724K4
Total capacity512 GB (4 × 128 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items512 GB 4 × 128 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power does each 128 GB DDR5 4800 RDIMM draw at its rated 1.1 V?

Each module operates at 1.1 V; total kit power depends on the Supermicro H14SHM memory-controller load and population rules.

Does the Supermicro H14SHM motherboard need a specific BIOS version or CPU to recognise all four 2Rx4 RDIMMs?

The kit is spec-matched to the H14SHM's 288-pin RDIMM slots and population rules; consult the board manual for supported capacities and any required BIOS revision.

Can I mix these 2Rx4 CL40 modules with older DDR5 RDIMMs of different rank or latency in the same H14SHM?

Mixing ranks or timings is not recommended; the board's memory controller expects identical 2Rx4 CL40 modules in each populated channel for stable operation.

More in Model-Specific Memory Upgrades

Similar items