NEMIX RAM 16GB DDR5 6400 CL52 1Rx8 1.1V ECC RDIMM GIGABYTE MZ73-LM1 memory upgrade
- 16 GB
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR5 ECC registered DIMM rated at 4800 MHz CL40, 1.1 V, 1Rx8, 288-pin, validated for Supermicro H14SSL-N motherboards
Size 16GB
This 16GB NEMIX RAM DDR5 ECC RDIMM runs at 4800MHz with CL40 latency and 1.1V operation. It is built specifically for the Supermicro H14SSL-N motherboard using the 288-pin registered form factor that board requires.
Operating at the standard DDR5 voltage of 1.10V, the module draws minimal power per stick. Without a heat spreader, it relies on chassis airflow, so adequate case ventilation keeps temperatures stable during sustained server workloads.
The single-rank 1Rx8 layout allows full-capacity population across all supported slots on the H14SSL-N. Registered buffering reduces electrical load on the memory controller, while ECC corrects single-bit errors to prevent data corruption. Verify your manual for approved DIMM population order before installation.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Server Memory |
| Model name | DDR5 ECC RDIMM Registered Server Memory |
| Part number | MR38400-618K1 |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN ECC RDIMM KIT |
Other versions of this model
Power down, open the chassis, and insert the module into the slot specified by the motherboard manual for single-rank 1Rx8 population; the step most often missed is following the exact DIMM sequence the manual lists for the CPU socket in use.
No routine maintenance is required; the module carries a lifetime replacement warranty, so a replacement would only be needed if a hardware fault develops.
The registered buffer and ECC logic keep every slot stable at the rated 4800 MT/s, so the first practical limit is the motherboard's maximum supported capacity per channel rather than the module itself.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?