We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 32GB (2×16GB) 4800MHz CL40 1.1V 1Rx8 Registered Supermicro H13SSH-E memory upgrade

SKU CH-W2Q6-VHBDR

A 32 GB dual-module DDR5-4800 registered ECC kit built to the Supermicro H13SSH-E's exact rank, voltage and timing requirements

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 32GB 2X16GB

Show 30 more
  • 32 GB dual-rank kit enables full-capacity server operation
  • DDR5-4800 CL40 at 1.10 V matches board timing specs
  • Registered ECC design corrects single-bit errors automatically
  • 288-pin RDIMM form factor fits Supermicro H13SSH-E slots
  • Major OEM Samsung Micron Hynix chips ensure enterprise-grade reliability

Exact-match DDR5-4800 RDIMM kit

This 32 GB kit (2 × 16 GB) delivers DDR5-4800 (PC5-38400) registered ECC memory at 1.10 V and CL40. It is built for the Supermicro H13SSH-E motherboard and uses 1Rx8 Samsung, Micron or Hynix chips. The registered architecture lets every slot run fully populated at rated speed while ECC corrects single-bit errors on the fly.

Straightforward 288-pin installation

The modules are standard 288-pin RDIMMs that seat in the board's DDR5 DIMM slots. No heat spreaders are fitted, so clearance is minimal. Follow the motherboard manual for the approved population order; incorrect slot filling or mixing ranks will prevent the system from posting at full capacity.

32 GB registered ECC capacity

Two 16 GB ranks give 32 GB of error-correcting memory for virtualization, databases or compute workloads. The registered buffer offloads the controller so all slots operate at 4800 MT/s. Workloads that need more than 32 GB per channel or unbuffered UDIMM modules are not supported by this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $939.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $29.37 per GB
Pricier than about 83% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 2 × 16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I confirm the kit is running at DDR5-4800 CL40 1.10 V after installing it in my Supermicro H13SSH-E?

Enter the BIOS and verify the memory speed reads 4800 MT/s, CAS latency shows 40, and voltage is set to 1.10 V; the registered ECC modules should also report 32 GB total with ECC active.

What comes in the package and do I need any extra parts for the Supermicro H13SSH-E?

The box contains two 16 GB 288-pin DDR5 RDIMMs for a 32 GB kit; no additional cables, brackets or cooling are required for the H13SSH-E motherboard.

Should I choose the 2 × 16 GB kit or a different capacity for the H13SSH-E?

The 2 × 16 GB kit matches the board’s 1Rx8 registered ECC population rules and delivers 32 GB at the rated 4800 MT/s; other capacities would need separate verification against the manual.

More in Model-Specific Memory Upgrades

Similar items