We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 4 ft power extension cord with C14 to C13 connectors

Nippon Labs

Nippon Labs 30POW-10W1-02204-BU computer power extension cord 4 ft blue C14 to C13 18 AWG 10A 250V

SKU CH-4EW0-VQXDP MPN 30POW-10W1-02204-BU

Blue 4 ft C14-to-C13 extension cord extends power connections for rack equipment, rated 10 A at 250 V with 18 AWG conductors

  • Connector count2
  • Connector detailsIEC-60320-C14 to IEC-60320-C13
  • Conductor gauge18 AWG
  • Conductor typeUL SJT 18 AWG. x 3C
  • Product typePower Extension Cable
  • Product colorBlue
  • Extend power reach for flexible equipment placement
  • Connect servers to PDU or UPS in data centres
  • Blue colour enables quick identification in dense racks
  • Fully moulded 18 AWG construction resists wear and damage
  • UL, cUL listed and CSA approved for safety compliance

Power Extension Cord For Data Centres

This 4 ft blue cord extends an existing IEC C13 connection using a C14 plug and C13 socket. It suits server racks and network cabinets where extra reach is needed between equipment and a PDU or UPS. The coloured jacket helps identify circuits in dense installations. It is not for builders who need a longer domestic mains lead or a different connector type.

Thermals Noise And Power Draw

The UL SJT 18 AWG three-conductor cable is rated for 10A at 250V and carries UL, cUL and CSA approvals. In normal operation the fully moulded connectors run cool and the cord adds no audible noise. Power loss over the short length is negligible for typical rack-mounted devices drawing well within the rated current.

Sustained Load Behaviour

Under continuous load the 18 AWG conductors remain within their temperature rating thanks to the SJT insulation and robust moulding. The blue colour coding stays legible after prolonged use in warm aisles. All materials comply with RoHS and REACH directives. The cord does not suit applications that exceed the 10A rating or require a heavier gauge.

How it compares

Measured against everything we stock in PC & Server Extension Cords, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 85% of the 401 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model name30POW-10W1-02204-BU
Product typePower Extension Cable
Product colorBlue
Ports & slots
Connector count2
Connector detailsIEC-60320-C14 to IEC-60320-C13
Size & build
Overall length4 ft (1.22 m)
Conductor gauge18 AWG
Conductor typeUL SJT 18 AWG. x 3C
Shipping weight0.16 kg
Package size191 × 76 × 51 mm

Questions about this item

How do I install the C14-to-C13 extension cord and what step do people often get wrong?

Plug the C14 end into the PDU or UPS outlet and the C13 end into the device inlet; the common mistake is reversing the connectors so the keyed notch does not align.

What maintenance or replacement will the 18 AWG SJT cord need later?

Inspect the fully moulded C13 and C14 ends for cracking or discolouration; replace the cord if the jacket shows heat damage or the pins become loose.

What limit appears first when the cord runs continuously at 10 A 250 V?

The 18 AWG conductors reach their 10 A rating first, so sustained loads above that will cause the cable to overheat before any connector limit is hit.

More in PC & Server Extension Cords

Similar items