Nippon Labs 30POW-10W1-04210 10 ft 16 AWG NEMA 5-15P to 5-15R computer power extension cord

10 ft NEMA 5-15 Extension

This 10 ft power cord extension adds reach between a wall outlet or PDU and a computer, monitor or peripheral. The cable carries a NEMA 5-15P plug on one end and a matching 5-15R receptacle on the other. It is built with 16 AWG conductors in an SJT jacket and rated for 13A at 125V. The fully moulded construction is UL, cUL listed and CSA approved, with RoHS and REACH compliant materials.

Check outlet and device ratings

Before ordering, confirm that the equipment you plan to connect draws no more than 13A at 125V. Verify that the existing outlet and the device inlet are both NEMA 5-15 types so the connectors match. Ensure the 10 ft length suits the routing path without creating tension or tripping hazards. The cord is rated for indoor use only.

Steady 13A load handling

Under continuous load the 16 AWG conductors deliver the rated 13A without exceeding temperature limits set by the UL and CSA listings. The SJT insulation and fully moulded strain relief resist heat buildup during sustained operation better than lighter gauge alternatives. Voltage drop over the 10 ft run stays within acceptable limits for typical desktop and monitor power supplies. The cord remains stable during prolonged use at the rated capacity.