We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6A ethernet cable, 100 ft, RJ45 connectors with molded boots

Nippon Labs

Nippon Labs 60CAT6A-100WT network ethernet cable Cat6A 100 ft White 24 AWG

SKU CH-EV6C-XCZVS MPN 60CAT6A-100WT

100-foot Cat6A UTP patch cable with RJ45 connectors supports 10 Gigabit Ethernet at 500 MHz over pure copper conductors

  • Cable category6A
  • First connectorRJ45
  • Second connectorRJ45
  • Conductor gauge24 AWG
  • Product typeNetwork Ethernet Cables
  • Overall length100 ft (30.5 m)
  • Supports 10 Gigabit Ethernet up to 100 metres
  • Operates at 500 MHz minimum frequency for high data rates
  • 24 AWG stranded pure copper conductors ensure clean signal
  • Gold-plated contacts with snagless boots resist corrosion
  • UL and ETL verified TIA/EIA compliant with RoHS approval

Nippon Labs Cat6A 100 ft UTP cable

This Nippon Labs Cat6A UTP patch cable runs 100 feet and terminates in RJ45 connectors on both ends. It is built for 10 Gigabit Ethernet over copper and suits installers who need a white, unshielded run for LAN drops, patch panels or direct device links. The 24 AWG stranded pure copper conductors follow the T568B wiring standard.

Thermals noise and power in normal use

As a passive copper cable it draws no power, produces no noise and generates no measurable heat during data transmission. The CM-rated PVC jacket and molded strain-relief boots protect the conductors from physical stress without active cooling. Gold-plated contacts resist corrosion to maintain consistent signal integrity over time.

500 MHz minimum frequency for 10 GbE

The cable is specified to operate at a minimum frequency of 500 MHz, which is the decisive figure for 10,000Base-T performance up to 100 meters. Buyers who need shielded construction for high-EMI environments or a different jacket rating for plenum spaces should look elsewhere.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $47.99
Pricier than about 83% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model name60CAT6A-100WT
Product typeNetwork Ethernet Cables
Product colorWhite
Connectivity
Cable category6A
Ports & slots
First connectorRJ45
Second connectorRJ45
Size & build
Overall length100 ft (30.5 m)
ShieldingNo
Conductor gauge24 AWG
Shipping weight1.63 kg
Package size279 × 203 × 127 mm

Questions about this item

How do I install the 100 ft Cat6A cable and what step do people often miss?

Route the 100 ft UTP cable between devices, then press each RJ45 plug until the snagless boot clicks; the step often missed is fully seating the 50 micron gold-plated contacts so the T568B wiring makes solid contact.

What maintenance or replacement will this 24 AWG Cat6A cable need later?

The stranded pure copper conductors and molded strain-relief boots are built for long life; only replace the cable if the jacket shows cuts, the boot tears, or a connector tab breaks after repeated unplugging.

What limit appears first on this 500 MHz Cat6A cable under sustained 10 Gigabit Ethernet loads?

The 100 ft length stays well within the 100 meter channel limit, so the first bound you hit is the 500 MHz frequency ceiling that defines Cat6A performance.

More in Ethernet & LAN Cables

Similar items