Nippon Labs 60CAT6A-7BK network ethernet cable Cat6A 7 ft black UTP 24 AWG

Cat6A 10 Gigabit patch cable 7 ft

This Cat6A UTP patch cable is built for 10 Gigabit Ethernet links up to 100 metres. It uses 24 AWG stranded pure copper conductors and RJ45 plugs with 50 micron gold contacts. The CM-rated PVC jacket meets TIA/EIA, UL, ETL and RoHS requirements. Wiring follows the T568B standard for universal LAN connectivity.

Suits 10GBASE-T runs under 100 metres.

Installers needing 10GBASE-T performance over copper at 500 MHz minimum frequency will find this cable fits the spec. The unshielded design keeps it flexible for patch panels and tight bends. Buyers who require foil or braid shielding for noisy environments should look at a shielded alternative. The seven-foot length limits use to short equipment hops.

500 MHz bandwidth enables 10000Base-T

The cable is rated for a minimum operating frequency of 500 MHz, which is the decisive figure for 10000Base-T Ethernet over copper. This bandwidth headroom also supports 10Base-T, 100Base-T and 1000Base-T without signal degradation. Crosstalk suppression and improved heat dissipation further ensure clean PoE delivery. Verify your link distance stays within the 100-metre channel limit.