We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Cat6A UTP Ethernet cable, seven feet long, RJ45 plugs on both ends, CM PVC jacket

Nippon Labs

Nippon Labs 60CAT6A-7RD Cat6A network ethernet cable 7 ft Red

SKU CH-FZCZ-0TCJP MPN 60CAT6A-7RD

Cat6A UTP patch cable with RJ45 connectors and 50 micron gold contacts, 7 ft red, supports 10 Gigabit Ethernet at 500 MHz

  • Cable categoryCat6A
  • First connectorRJ45
  • Second connectorRJ45
  • ShieldingUnshielded Twisted Pair
  • Team affiliation10 Packs
  • Product typeNetwork Ethernet Cables
  • Supports 10 Gigabit Ethernet at 500 MHz minimum frequency
  • 50 micron gold-plated RJ45 contacts resist corrosion for reliable connections
  • 24 AWG stranded pure copper conductors ensure flexible, low-loss signal transmission
  • CM-rated PVC jacket meets flame-safety standards for in-wall installation
  • 7 ft red cable simplifies colour-coded network management

7 ft Cat6A patch cable for 10 Gigabit Ethernet

This Nippon Labs cable is a 7 ft Cat6A UTP patch cord with RJ45 connectors on both ends. It uses 24 AWG stranded pure copper conductors and 50 micron gold-plated contacts. The CM-rated PVC jacket follows the T568B wiring standard and meets TIA/EIA requirements verified by UL and ETL.

Replaces Cat5e or Cat6 links when 10 Gigabit

The cable is rated for a minimum frequency of 500 MHz and a 550 MHz bandwidth rating, supporting 10Base-T through 10000Base-T Ethernet up to 100 meters. Crosstalk suppression and improved heat dissipation make the jump worthwhile for PoE runs and high-throughput backbone connections.

Suits installers wiring 10 Gigabit drops up to 7 ft

Builders who need longer runs, shielded construction, or non-booted connectors should look at other options. The fixed 7 ft length and unshielded design limit use to short patching tasks in standard indoor environments.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $14.99
Typical for this category: the median of 9,945 items is $14.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model name60CAT6A-7RD
Product typeNetwork Ethernet Cables
Product colorRed
Connectivity
Cable categoryCat6A
Ports & slots
First connectorRJ45
Second connectorRJ45
Size & build
Overall length7 ft (2.13 m)
ShieldingUnshielded Twisted Pair
Shipping weight0.15 kg
Package size178 × 165 × 51 mm
More details
Team affiliation10 Packs

Questions about this item

What clearance does the 7 ft RJ45 booted cable need for a clean bend?

The CM PVC jacket on this 7 ft Cat6A cable uses 24 AWG stranded copper, so allow a bend radius of roughly four times the cable diameter to avoid kinking the pairs.

Which wiring scheme do the 50 micron gold RJ45 plugs follow, and what is the common crimping mistake?

Both ends are wired to T568B; the frequent error is mixing T568A on one end, which crosses the pairs and kills the 500 MHz headroom.

When should the 10-pack of red Cat6A UTP cables be replaced in a PoE deployment?

Inspect the boot and gold contacts after any re-termination; if the 50 micron plating shows wear or the jacket cracks near the plug, swap the cable to keep 10 Gigabit and PoE power stable.

More in Ethernet & LAN Cables

Similar items