We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat7 Ethernet cable, four feet long, shielded RJ45 connectors with gold contacts, PVC jacket

Nippon Labs

Nippon Labs 60CAT7-4BL Cat7 network ethernet cable 4 ft blue

SKU CH-1452-KMXBK MPN 60CAT7-4BL

Shielded Cat7 patch cable with gold-plated RJ45 connectors, rated for 600 MHz Gigabit Ethernet over four feet

  • Cable category7
  • Conductor gauge26 AWG
  • Overall length4 ft (1.22 m)
  • Product colorBlue
  • Key features26AWG double shielded 4pair stranded pure copper wire RJ45 s
  • 600 MHz bandwidth supports high-speed Gigabit Ethernet
  • Double shielded SSTP construction reduces crosstalk and noise
  • 50 micron gold-plated contacts ensure reliable signal transfer
  • 26 AWG stranded pure copper conductors enhance performance
  • Molded strain-relief boots protect connectors from damage

4 ft Cat7 shielded patch cable

This 4 ft Cat7 cable uses double-shielded 26 AWG stranded pure copper pairs and 50 micron gold-plated RJ45 contacts. It is rated for 600 MHz bandwidth and complies with TIA/EIA standards verified by UL and ETL. The blue CM-type PVC jacket and moulded strain-relief boots suit short indoor patch runs.

Upgrade from unshielded Cat5e or Cat6

The SSTP construction adds individual foil shields plus an overall braid, reducing crosstalk and system noise beyond Cat6 limits. The jump is worth it when Gigabit Ethernet links run near power cables, fluorescent ballasts or dense patch panels where alien crosstalk degrades throughput.

Snagless boot eases tight ports

Push the connector until the boot clicks; the moulded relief prevents latch breakage during removal. What usually goes wrong is forcing the tab on recessed switch ports — depress the boot fully before pulling. No tooling or grounding lug termination is required for this pre-terminated assembly.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 80% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model name60CAT7-4BL
Product colorBlue
Connectivity
Cable category7
Size & build
Overall length4 ft (1.22 m)
ShieldingYes
Conductor gauge26 AWG
Shipping weight0.10 kg
Package size152 × 127 × 25 mm

Questions about this item

Will the moulded boot on the RJ45 connector clear a recessed switch port?

The connectors have moulded strain-relief boots that extend past the RJ45 body; check the recess depth on your switch to ensure the boot seats fully without forcing the latch

What is the correct crimp orientation when terminating the T568B wiring on this Cat7 patch cable?

The cable follows T568B pinout with orange-white on pin 1; verify the connector housing key matches the jack before pressing the boot home to avoid reversing the pair order

How often should the 50 micron gold-plated contacts be inspected or the cable replaced in a 600 MHz Cat7 installation?

Inspect the gold-plated contacts annually for dust or oxidation; replace the patch cable if the boot cracks, the jacket kinks, or link errors appear on 600 MHz certified runs

More in Ethernet & LAN Cables

Similar items