Nippon Labs 60CAT7-9BL network ethernet cable Cat 7 9 ft blue 26AWG 600MHz shielded

9 ft Cat 7 shielded patch cable

This 9 ft Cat 7 shielded patch cable uses 26AWG stranded pure copper conductors with individual pair foil and an overall braided shield. It is rated for 600 MHz bandwidth and terminated with RJ45 plugs that have 50 micron gold plated contacts. The CM type PVC jacket meets TIA/EIA requirements verified by UL and ETL, and the cable is RoHS compliant. It suits home and office LAN connections that need certified Cat 7 performance.

Snagless boots and T568B wiring simplify

Molded strain relief boots protect the latch tabs so the connectors release cleanly from ports without catching on adjacent cables. Both ends follow the T568B wiring standard, which is the common pinout for most Ethernet equipment. The double shielded construction is stiffer than unshielded cable, so allow a gentle bend radius and avoid sharp kinks behind racks or under carpet. Ensure the shielded plugs fully seat into grounded ports to maintain the shielding path.

Verify port spacing and shield grounding before

Check that the booted RJ45 connectors fit side by side on your switch, router or patch panel without blocking adjacent ports. The cable uses shielded plugs, so the connected equipment must provide a grounded RJ45 jack to complete the shielding circuit; otherwise the shield floats and noise rejection is reduced. Confirm the 9 ft length reaches between your devices without tension, and note that Cat 7 performance is specified over 100 m (328 ft) so shorter runs are well within the standard.