We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue SATA cable six inches long with ninety-degree and straight connectors

Nippon Labs

Nippon Labs SATA3L0.5FT-90/180BU sata cable 6 in 90 to 180 degree

SKU CH-FYQ2-4P7BH MPN SATA3L0.5FT-90/180BU

A 6-inch SATA III cable with a 90-to-180-degree locking connector for tight internal routing

  • Cable length6 in (15.2 cm)
  • Connector count2
  • Connector details90 degree to 180 degree
  • Product typeSATA III
  • Product colorBlue
  • Overall length0.5 ft (0.15 m)
  • 6 Gb/s peak bandwidth for fast data transfers
  • Backward compatible with 3 Gb/s and 1.5 Gb/s devices
  • 90-degree to 180-degree angled connectors fit tight spaces
  • Locking latch secures connection against vibration
  • Flexible rubber sleeving bends and twists without damage

Cable Purpose

This 6-inch SATA III cable connects a motherboard or controller to a single drive using a 90-degree plug on one end and a straight 180-degree plug on the other. The mixed-angle layout lets builders route the cable cleanly in tight drive cages or behind motherboard trays where a straight connector would foul adjacent components. It is suited for system integrators and hobbyists who need a short, angled link without excess slack.

Build and Connectors

Each end carries a locking latch that resists accidental unplugging during transport or vibration. The blue jacket uses durable flexible rubber sleeving that tolerates repeated bending and twisting during installation. Connectors are rated for SATA 6 Gb/s and remain backward compatible with 3 Gb/s and 1.5 Gb/s devices. RoHS compliance confirms restricted-substance adherence.

Upgrade Context

The cable replaces a standard straight-to-straight lead when clearance between the drive and the port is limited or when cable management demands a sharp turn at one end only. The jump is worth it when the 6-inch length matches the exact port-to-drive distance and the 90-degree orientation solves a routing conflict that a straight plug cannot. It does not suit builds that require longer runs or dual-drive connections from a single header.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 80% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model nameSATA3L0.5 ft-90/180BU
Product typeSATA III
Product colorBlue
Ports & slots
Connector count2
Connector details90 degree to 180 degree
Size & build
Overall length0.5 ft (0.15 m)
Cable length6 in (15.2 cm)
Shipping weight0.01 kg
Package size178 × 64 × 22 mm

Questions about this item

What speed does the SATA III interface on this cable support?

The cable supports SATA 6 Gb/s technology and is backward compatible with 3 Gb/s and 1.5 Gb/s devices.

How much clearance does the 90-degree to 180-degree connector layout require?

The cable is 6 in. long with one 90-degree and one 180-degree connector, designed for tight spaces where straight plugs will not fit.

How do you release the locking latch when removing the cable?

Press the latch release tab on the connector before pulling; forcing it out without releasing the latch can damage the port.

More in SATA & eSATA Drive Cables

Similar items