STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Three straight SATA cables with metal locking latches, 50 cm each, support 6 Gbit/s data transfer for HDDs, SSDs and optical drives
This pack supplies three straight SATA data cables, each 50 cm long, with a metal locking latch on every connector. They connect 2.5 inch SSDs, 3.5 inch HDDs, optical drives or RAID controllers to a motherboard or host controller. The black colour aids cable management inside the case. Buyers who need right-angled plugs or an external eSATA link cannot use these cables.
Each cable meets the SATA III specification, supporting data rates up to 6 Gbit/s (600 MB/s) continuously rather than only in short bursts. The locking latch prevents accidental disconnection during vibration or chassis movement, keeping the link stable under sustained load. Backward compatibility with SATA I and SATA II allows the same cables to serve older hardware without speed negotiation issues.
The decisive specification is the integrated metal latch that clicks into the drive and motherboard ports, ensuring the cable stays seated until deliberately released. Without this feature a standard friction-fit cable can work loose over time, especially in systems that are moved or vibrate. If your build does not require a positive lock, a simpler unlatched cable would also function.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Cable Connectors |
| Product color | Black |
| Ports & slots | |
| Connector count | SATA Male |
| Connector details | SATA Male |
| Connector gender | SATA Male |
| Size & build | |
| Overall length | 50 cm |
| Cable length | 50 cm |
The cable is a passive data link with no active components, so it produces no heat or noise during continuous operation.
You need a motherboard or host controller with a standard SATA port and a 2.5 inch SSD, 3.5 inch HDD or optical drive that also has a SATA interface.
They are backward compatible, so they will negotiate the slower SATA I or SATA II speed automatically when connected to legacy drives or controllers.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?