Orico 0.3m USB 3.0 to SATA hard drive adapter
Connects a 2.5-inch SATA drive via USB 3.0 with UASP up to 5Gbps and includes a Type-C 5V power port for drives up to 6TB
- Adapter typeUSB 2.0 to SATA
Changer Type USB 2.0 to SATA
- USB 2.0 to SATA$11.99
- USB 3.0 to SATA$10.99
- USB Type-C to SATA$11.99
Model 0.3m
- 0.3m$11.99
- 0.5m$11.99
- 1m$11.99
Model With Cover
- 2.5in HDD/SSD$9.99
- With Cover$11.99
- 5 Gbps peak throughput with UASP support
- 480 MB/s measured transfer rate
- Type-C 5 V power port drives 6 TB drives
- Driver-free plug-and-play on Windows, Linux, macOS, Android
- 3 m cable keeps 2.5" SATA drives tidy
USB 3.0 to SATA Adapter
This Orico adapter connects a 2.5 inch SATA hard drive or SSD to a USB 3.0 port. It supports UASP protocol for speeds up to 5 Gbps and includes a Type-C 5V power port for larger drives. The cable length is 0.3 m. It works with Windows, Linux, Mac OS and Android without drivers.
Thermals Noise and Power
The adapter draws power from the USB port and the optional Type-C 5V input for drives up to 6 TB. No fan or active cooling is present so operation is silent. Power consumption scales with the attached drive. The short cable keeps voltage drop low during normal file transfers.
Sustained Load Behaviour
Under continuous read or write workloads the test speed reaches 480 MB/s. UASP support helps maintain throughput during long transfers. The Type-C power port ensures stable current for high-capacity drives. Thermal throttling is not a factor because the adapter has no controller heat sink.
How it compares
Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 90% of the 1,721 comparable items (median $22.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Adapter type | USB 2.0 to SATA |
Other versions of this model
5 more in the same range
Orico 0.5m USB 3.0 to SATA hard drive adapter with cover
- USB 2.0 to SATA
Orico USB 3.0 to SATA 2.5 inch Hard Drive Adapter 1m With Cover
- USB 2.0 to SATA
Questions about this item
How do I connect the 0.3m USB 3.0 to SATA adapter to a 2.5 inch drive and what step is often missed?
Plug the SATA connector into the 2.5 inch drive, then insert the USB 3.0 plug into the host. The step often missed is using the reserved Type-C 5V power port when the drive needs more current than the USB port supplies.
What part of the adapter will need replacement first with regular use?
The 0.3m cable and its USB 3.0 connector see the most physical stress. Repeated bending or unplugging can wear the contacts or fray the sheath, so the cable assembly is the item most likely to need replacing.
What speed limit appears first during a long, large-file transfer?
The USB 3.0 link caps sustained throughput at 5Gbps, and real-world tests top out near 480M/s. Under continuous load the interface bandwidth is the first bottleneck, not the SATA 3.0 drive itself.
More in SATA, IDE & M.2 Drive Adapters
Similar items
Sabrent EC-SSHD USB 3.0 to 2.5" SATA Hard Drive Adapter
- 4 In
- USB 3.0 to SSD/2.5…
RIITOP Dual M.2 NVMe & SATA Adapter Card with Low-Profile Bracket
- PCIe Controller Card
- M Key PCIe M.2 NMVe…
STARTECH IDE2SAT2 IDE to SATA hard drive adapter 40-Pin PATA to 2.5
- IDE to SATA with OD…
- IDE 40-Pin
Sabrent EC-PCIE NVMe M.2 to PCIe x16/x8/x4 adapter with heatsink
- M.2 (NGFF)
- PCIe x4 via full si…
iDsonix USB3.0-A-0.5m SATA to USB 3.0 2.5 inch hard drive adapter
- USB 3.0
- Up to 5 Gbit/s










