We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black plastic drive caddies with open side slots and integrated SATA connectors

Orico

Orico 2.5 to 3.5 SATA Hard Drive Adapter 2-Pack 1125SS-2

SKU CH-0CTY-CKVHK

Converts 2.5-inch SATA drives to 3.5-inch form factor with built-in SATA III interface for 6Gbps speeds, hot-swap support and secure screw mounting in desktop bays

  • Product colorBlack

Model 2 Packs

  • Converts 2.5″ drives to 3.5″ form factor for desktop installation
  • SATA III interface delivers up to 6Gbps transfer speeds
  • Supports hot-swap and plug-and-play without extra cables or drivers
  • Fits 7mm, 9.5mm and 12.5mm drive heights securely with screw mounting
  • Open-sided design improves heat dissipation for the installed drive

Converts 2.5 SATA drives to 3.5 form factor

This two-pack of Orico adapters lets you install 2.5-inch SATA hard drives or SSDs into standard 3.5-inch drive bays. Each bracket matches the exact dimensions and screw-hole pattern of a 3.5-inch drive so it fits without modification. The integrated SATA III connector eliminates separate data cables and supports hot-swap operation. Black ABS construction with open side slots aids heat dissipation.

Suits desktop builders adding laptop-class SATA

Ideal for anyone fitting 7 mm, 9.5 mm or 12.5 mm SATA SSDs or HDDs into desktop cases, server chassis or 3.5-inch hot-swap trays. Not for 2.5-inch drives that use a different interface, nor for 3.5-inch drives that already fit the bay. Also unsuitable if your mounting points require a different hole spacing.

Built-in SATA III interface runs at 6 Gbps

The adapter itself carries a SATA 3.0 connector rated for 6 Gbps maximum throughput and is backward compatible with SATA I and II. This single specification determines whether your drive can reach its full speed potential when installed in the bracket.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 91% of the 1,721 comparable items (median $22.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product colorBlack

Other versions of this model

2 more in the same range

Questions about this item

What type of drive bay or enclosure must I already have to install this adapter?

You need a standard 3.5-inch drive bay or tray that accepts a 3.5-inch form factor, as the bracket matches those exact dimensions and screw-hole positions.

Will my existing SATA I or SATA II cables and motherboard ports work with this adapter?

Yes, the built-in SATA 3.0 interface is backward compatible with SATA I and SATA II, so your current cables and ports will function normally.

How can I verify the adapter is delivering the expected 6Gbps link speed after installation?

Check the negotiated link speed in your BIOS or OS disk utility; it should report 6 Gbps when a SATA III drive is seated and the host controller supports SATA 3.0.

More in SATA, IDE & M.2 Drive Adapters

Similar items